HEALTH AND SAFETY I
t’s unlikely that anyone working in the painting and decorating industry doesn’t realise the health risks of old leaded paint, but perhaps you are unsure of where you may find it and exactly how to deal with the problem...
Old lead paint
What you need to know as a painter and decorator
‘ Lead pigments were widely used in paints for homes, schools and offices until the 1960s.
‘ Lead pigments were not removed from commonly used paints until the early 1980s.
‘ Lead paint can be found under existing paintwork in older buildings.
These are essential health and safety tips as specified by HSE that you should follow:
‘ Breathing or ingesting lead dust or fume can cause serious problems like kidney, nerve and brain damage or infertility.
‘ You are most at risk if you regularly do common jobs like:
• remove existing paint coatings inproperties built before the 1980s;
• stripping old paint using blow lamps orgas torches;
• dry sanding old paint.
‘ You can take simple steps to stop this dust and fume that will meet the law:
• Only strip old paint if it is flaking, chipping or it is a risk to children.
•Use a combination of chemical stripper, wet abrasive paper and on-tool extraction.
• If paint is good, use waterproof abrasive to make a key for the new coat of paint.
• Remove any debris with a damp cloth. •Use a plastic bag for disposal of all waste.
Fee for Intervention
HSE now recovers the costs of time spent dealing with material breaches of health and safety law. This is known as Fee for Intervention (FFI). FFI generally applies when an inspector finds something wrong that they believe is serious enough for them to write to you about. A fee is charged for the
time spent by the inspector in sorting it out. Following the simple guidance on this sheet may help you to avoid having to pay a fee.
1 Plan your work Remove or protect soft furnishings and surfaces with plastic sheeting. Wear disposable overalls and an FFP3 mask.
2 Stop dust getting into the air Use wet abrasive paper or on-tool extraction. Passive capture bags on tools are less effective.
3 Stop lead fume being produced Set hot air guns or infrared equipment below 500°C. Do not use gas torches or blow lamps.
4 Wash hands and forearms before eating, drinking and smoking
The small sink is not suitable. Provide a large sink, hot or warm running water, soap and towels.
38
This guidance is issued by the Health and Safety Executive. Following the guidance is not compulsory, unless specifically stated, and you are free to take other action. But if you do follow the guidance you will normally be doing enough to comply with the law. Health and safety inspectors seek to secure compliance with the law and may refer to this guidance.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
