This page contains a Flash digital edition of a book.
February, 2016


www.us-tech.com Pittman Intros Brushless Motor Drive


Harleysville, PA — Pittman Motors, a business unit of Ametek Precision Motion Control, has introduced the PBL4850E programmable three-


prietary software makes program- ming motors easier through the use of onscreen buttons, instead of compli- cated command sets or programming languages. The motor drive is a four-quad-


rant brushless controller that uses sinusoidal commutation to produce smooth motion. The torque produced by this method minimizes torque rip- ple. The drive further refines motion by incorporating two motion profiles: trapezoidal, and S-curve. The latter may be used to eliminate jerk due to rapid changes in velocity rates dur- ing motion. The drive offers programmable


Brushless DC motor drive.


phase, brushless motor drive to its Idea™ line of motor controllers. With the new drive, users can create dis- tributed standalone complex motion profiles intuitively and quickly, elim- inating the need for additional motion control components such as programmable logic controllers or field communication buses. Among the features of the graph-


ical user interface is automatic popu- lation of motion profile parameters based on the entry of a few motor char- acteristics. Complex motor parameter calculations or in-depth knowledge of motor specifications is not required for proper operation. The company’s pro-


Connectors Etters, PA — FCI, a supplier of con- nectors and interconnect systems, has expanded its power connector family with the PwrMax® Ortho power connectors. The new connec- tors are designed to support the data center equipment trend known as orthogonal system packaging archi- tectures. This architecture can offer improved data transfer and system cooling by eliminating mid-plane cir- cuit boards. These connectors can be used with either busbars or circuit boards to distribute power in sys- tems with orthogonal architectures.


FCI Expands Line of Power


Capacitors for Pfor Power Electronics Capacitors for Po er E ec er Elecl


current control of up to 5.6A peak with an option current boost during ramp-


ing of up to 6.5A peak. With an input voltage of 12-48VDC, the drive can accommodate a wide variety of brush- less motors. Hall cell signals are used for phase initialization, and an encoder provides positional feedback. Other features include eight


opto-isolated general purpose inputs and outputs. Each input is rated for 5 to 24VDC, 8mA per input. The outputs are open collector, 5 to 24VDC, 200mA maximum per outputs. The drive com- municates by USB to mini USB. The Idea software is config-


urable with numerous programming units to provide versatility in creat- ing programs. Selecting units of rev- olution creates a platform for users to generate complex velocity motion


profiles geared towards rotary-based applications. Selecting units of inch- es or millimeters simplifies the pro- gramming within a linear-based setup by allowing users to program with native units within the system to generate motion profiles. The drive is well-suited for inte-


gration into systems because of its ability to store a wide range of com- plex motion programs in memory, and is capable of executing them inde- pendently, without a connection to a


computer or communications bus. Contact: Pittman Motors, 343


Godshall Drive, Harleysville, PA 19438 % 267-933-2105 E-mail: info.pittman-motors@ametek.com Web: www.pittman-motors.com


Page 83


PwrMax connectors for orthogonal architectures.


The connectors have the compa-


ny’s GCS™ plating and support cur- rent loads of up to 100A per contact. The connectors are energy efficient, with a maximum contact resistance of 0.3mW, and are rated to operate at temperatures up to +125°C (257°F). The robust design of the new power connectors provides a reliable low resistance interconnect path for


orthogonal architectures. Contact: FCI USA, LLC, 825


Old Trail, Etters, PA 17319 % 717-938-7200 fax: 717-938-7527


E-mail: technicalservices@fci.com Web: www.fci.com


IGBT Snubbers RF Mica Capacitors DC Link Capacitors


-High Current, High Voltage Film -High Capacitance Aluminum Electrolytic AC Output Harmonic Filter Capacitors


COutputHarmonic Filter Capacitors www.cde.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96
Produced with Yudu - www.yudu.com