Process Equipment
TC Intelligent Pump for the Ceramic Industry
Tapflo Group is an independent, family-owned, Swedish manufacturer and global supplier of Air operated diaphragm pumps, centrifugal pumps, and other industrial process equipment. Our ambition is to provide a wide range of premium products for various industrial applications. With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial pump. Please check our latest success stories from clients around the world.
PE & PTFE Diaphragm Pumps for the Surface Treatment Industry Back in 2004, Tapflo delivered more than thirty diaphragm pumps to a hot dip galvanizing plant in Sweden. At that time this plant was one of the world’s most modern of its kind, with one manual and two fully automated facilities.
It was an explicit demand of the plant’s maintenance manager to use diaphragm pumps from Tapflo: - “Because I know it works!”
The pumps are used to pump wastewater, acid, lye and flux to various parts of the treatment plant. All pumps are made of polyethylene (PE) with diaphragms in PTFE, a proven solution in the surface treatment industry. They have lived up to the expectations and most of the pumps are still running since they were put into operation more than 14 years ago.
TC Intelligent Pump for the Ceramic Industry One of the ceramic industry leaders had a hard time finding an appropriate pump for their production line. They tested solutions from a few brands but nothing met their requirements until they did run Tapflo TC50 intelligent pump fitted with the LEAP® technology.
In the tested application, the pump transfers ceramic glaze from the container directly to the robot which sprays the glaze on the bathroom’s ceramics like sinks, toilet bowls etc.
Our client was astonished by the smooth operation, low pulsation, noise and air consumption reduction. It is worth to mention that the pump was tested with an air flow meter and TC50 consumes 60% less air than direct competitor!
Upon testing the client ordered 5 more of TC50 pumps for the other machines.
SEPTEMBER/OCTOBER 2018
www.reviewonline.uk.com
Diaphragm Pump for the Nuclear Industry Tapflo has delivered a pneumatic diaphragm pump of its largest model for use in various applications in the nuclear industry. The pump, which is presumably the first of its kind in the world, has been developed in cooperation with the Fagerstrom Industry Consultant with extensive experience from deliveries to the nuclear industry.
In a first application, the pump is installed in a mobile system for decontamination. The system’s task is to clean and remove radioactivity from different parts during the inspection, servicing and replacement of a nuclear power plant. More applications can, however, be considered as a pump of this kind requested from several directions.
The pump, which is a special version of Tapflo largest T825 model, meets the requirements for a Class 3 component, which means that it is approved for inclusion in the system used for the plant’s operation.
It was a long and demanding project, says Henrik Borisch, product manager at Tapflo, who also directed the project. It took a lot of calculations, documentation, and testing before it was approved and clear. While it is comforting to know that you do not compromise on anything when it comes to equipment of this type.
For more information please contact:
mikolaj.laguna@
tapflo.pl www.tapflo.com
ENQUIRY NO. 9
9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40