This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
BUDGET 94mm LOCKING FUEL CAP ASSEMBLY With locking cap insert and integral, 2-stage, 51mm (2" ) and 58mm (2¼") neck. Internal aluminium retaining ring with M5 threaded inserts. Fits through a 62mm hole. Overall height 63mm. Fixing hole PCD 76mm. Cork gasket, two keys and M5 Stainless fixing pack included. IVA-OK when fitted with a tether on non-cat vehicles or with a fuel nozzle insert unleaded vehicles (sold separately). SATIN ALUMINIUM #AERO694 £50 (£60 inc vat)
94mm AERO CAP & VENTED NECK PACKAGE This neck and cap combination could solve your fuel filler installation problems in one fell swoop. The fabricated, powder-coated steel neck has a main hose outlet of 45mm diameter, a filling breather of 16mm diameter and a vent of 8mm diameter. The non-vented, locking Aero Cap is supplied with a cork gasket and is also sealed to the neck with an 'O' ring. The locking cap insert is tethered with a wire cable to the surround for IVA compliance and is available in Satin Black or Anodised Aluminium. Supplied with two keys and a set of countersunk stainless screws and nuts. Weight 500 gms. ANODISED SATIN BLACK #CVN94BK £195 (£234 inc vat) ANODISED NATURAL ALLOY #CVN94NAT £185 (£222 inc vat)
10º
FUEL FILLER NECK TiG welded aluminium filler neck. 50mm diameter x 1.5mm tube 50mm long welded to 100mm diameter, 2mm thick plate. Drill it yourself to suit your flange hole spacings. This item can also be bonded and riveted upside down to form a filler neck on any fuel tank. #FILLNECK £22 (£26.40 inc vat)