This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FUSE BOXES WITH LED INDICATORS These very nice fuse boxes have a red LED next to each fuse that will illuminate if the fuse is blown (no, we don't know how it works either !!). They have snap-on, clear plastic covers, a 10-32 threaded stud for the Positive supply to the fusebox and 1/4" male spade terminals for the fused outputs. FOUR WAY Size: 86 x 48 x 36mm high. Two 5mm mounting holes at 28mm centres. #FBLED4 £9 (£10.80 inc vat)
SIX WAY Size: 86 x 63 x 36mm high. Four 5mm mounting holes at 16mm x 28mm centres #FBLED6 £11 (£13.20 inc vat)
DISTRIBUTION & FUSE BOX There are three independent supply connections on this useful box - A Negative (earth)distribution with one M5 threaded stud input post and 12 x M4 threaded output screws. The Positive side is split into two separate busbars, each with a 10-32 threaded stud input and 6 x fused outputs so you can have a permanent live side and an ignition-switched side (fuses not included). You can use either ring or fork terminals on all the input and output connections. The clear plastic cover is secured or removed with half a turn of the red knob. 12 FUSE Overall size: 165mm x 95mm x 57mm high. Four, 5mm dia. fixing holes at 140mm x 75mm centres FB12DST £32 (£38.40 inc vat)
6 FUSE Overall size: 124mm x 95mm x 57mm high. Four, 5mm dia. fixing holes at 100mm x 75mm centres #FB6DST £28 (£33.60 inc vat)
TEN WAY Size: 86 x 95 x 36mm high. Four 5mm mounting holes at 27mm x 48mm centres #FBLED10 £14 (£16.80 inc vat)