This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
LIGHTWEIGHT HEATER WITH 3 SPEED FAN. Heaters don't come much lighter than this little beauty. It requires just a hot water feed from your engine and a 12 volt supply. Maximum dimensions 10" (255mm) wide x 4½" (115mm) high x 7½" (190mm) from the front to the back, yet still has a remarkable heat output of 4.3 KW. Inlet diameter 75mm. Simple plumbing - 15mm inlet and outlet. Maximum air-flow 230 m³/hr through the deflecting vents on the front panel. Four pin connector on 100mm fly lead. Fan motor maximum current 5.8 Amps. Weight just 1.5Kg. Noise level 63db. WIRING ON 4 TERMINAL MULTI PIN MALE SPADE PLUG:. NEG 12V - Black, SLOW - Yellow, MEDIUM - Red, FAST - Orange. Includes fan switch #SWFAN2 #HEAT7 £110 (£168 inc vat)
DUCTING REDUCERS Moulded ABS, For joining different diameters of ducting. Ducting can be glued, cable tied or hose- clipped. Flange diameter 76mm. Length 59mm. Wall thickness 2.4mm. 60mm to 40mm #DRED6040 £4 (£4.80 inc vat)