This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
FUEL SWIRL POT This 1.5 litre lift tank prevents misfiring due to tank surge and fuel starvation in fuel injected engines during hard cornering, braking and acceleration. 1. Top - 6mm breather/return to main tank. 2. Inlet - 8mm fuel feed via a low pressure electric pump from the main tank. 3. Inlet - 8mm return from fuel rail. 4. 12mm main outlet to your high pressure pump.
Overall size 215mm high, 100mm diameter. Weight 460 gms. Available with: BOTTOM MOUNT #SWIB £89 (£106.80 inc vat)
REAR MOUNT #SWIR £89 (£106.80 inc vat)
1
2 3
satin black coated swirl pot has a capacity of 480cc. Overall height 185mm high, 93mm maximum diameter. The inlet and return on the top are threaded 1/4" BSP female. Two 1/4" BSP x 3/8" (10mm) brass unions are supplied. The bottom outlet (to the main fuel pump) is 12mm diameter. There is a brass bleed plug on the top. A stainless steel mounting bracket with fixings is included. Weight 850 gms. DIECAST SWIRL POT #SWIRL £112 (£134.40 inc vat)
FUEL SURGE TANK POLISHED ALUMINIUM This very clever surge tank is manufactured mostly from one piece of 3mm aluminium sheet. The only weld is on the closing plate on the base so no welds are visible when it's mounted. A selection of eight 'O' ring fittings is included: 1 x 6mm Hosetail 2 x 8mm Hosetail 1 x 12mm Hosetail 3 x AN6 (9/16" UNF) 1 x AN8 (3/4" UNF)
Height (without unions fitted) 195mm. Diameter 108mm. Base 130mm square with 4 x 8mm fixing holes on 100mm square. Capacity 1.5 Litres. Weight (including all unions) 520 gms. #SURGE £82 (£98.40 inc vat)
Selection of unions fitted for illustration
4
REAR MOUNT
Page 64
WE AIM FOR 100% STOCK OF ALL ITEMS FOR SAME DAY SHIPPING
To order Tel: 01580 891309 or 01580 448007 or Fax: 01580 893733 ISSUE 31