This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
ANGLED TWIN ROUND LAMP HOUSING 202mm x 114mm 82 maximum front to back. 12 degree angle for mounting on sloping rear panels. Shown below with a clear #RL57 and RLT12 fitted. Can be painted. #HOU3 £28 each (£33.60 inc vat)
PARALLEL TWIN ROUND LAMP HOUSING Same height and width as #HOU3 but 60mm front to back #HOU4 £24 each (£28.80 inc vat)
#HOU3
PLINTH Simple addition for surface mounting lights. Only a 12mm central hole in your panel required for wiring. Moulded ABS. 100mm diameter x 24mm high. 4 x 5mm fixing holes@ 66mm centres. 45mm hole in back. ACCEPTS OUR #RLT7 to 12 and with a little simple modification (remove the fixing projections on the inside), our #RL40, 41 and 42. #PLINTH £3.50 each (£4.20 inc vat)
#HOU4
RECESSED PLINTH Here's another option for mounting your 95mm rear lights. Just cut a hole 88mm diameter in your panel and bond or screw-in the plinth. The lamp is then fixed to the plinth with two small self-tappers. Height of plinth above surface is just 8mm. Maximum diameter 99mm. Rear projection 16mm. #PLINTH2 £3.50 each (£4.20 inc vat)
RETRO SMALL LED STOP / TAIL ' E4' Marked Hers's a lovely little, discreet stop and tail lamp. Made from satin black, powder-coated steel, it measures just 58mm diameter and 56mm front to back. It has two, M5 fixing bolts at 14mm centres on an adjustable bracket and sleeved 300mm fly- leads. #RL84 £70 pair (£84 inc vat)