This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
84mm BLACK ROCKING VANE DASH VENTS Great for face or demist vents. Swivelling directional vane. 84mm maximum diameter. Snaps into a 76mm hole. Ducting can be bonded or secured to the inlet with acable tie. 40mm inlet #VENT1540 50mm inlet #VENT1550 60mm inlet #VENT1560 65mm inlet #VENT1565 All £8 each (£9.60 inc vat)
DASH VENT Black ABS. 100mm square x 12mm thick surround. Rotating and flipping vent insert 72mm diameter. Insert can be removed and used alone in a 68mm diameter hole. Use our bulkhead flanges to connect ducting hose behind vent. #VENT11 £7 (£8.40 inc vat)
ELECTRIC DEMIST HEATER Now you can have front screen demisting without the hassle of plumbing-in a hot water powered heater. This neat little unit has a moulded ABS case with an electric fan and a 168 watt 12 volt heater element. Simply cut a rectangular hole in your dash top and bond the unit underneath (shown below). IVA compliance may depend upon your particular installation and may require more than one unit. Size 65mm x 193mm x 87mm with swivel base. #DEMST £22 (£26.40 inc vat)
NOTE: We do not recommend ducting the airflow from this unit.
CHROME BEZEL #VENT16 £10 each (£12 inc vat)
Shown below fitted to a panel and finished with our ALUMINIUM ESCUTCHEON #AE95X50 £5 (£6 inc vat)
DASH VENT Black ABS. Facia 72 x 59mm. Built-in plenum with integral butterfly valve controlled with thumb-wheel. Overall depth 63mm. Rocking vent panel in facia with direction flaps. 40mm duct inlet on side. Available left or right hand. LEFT HAND #VENT12LH £18 (£21.60 inc vat)
RIGHT HAND #VENT12RH £18 (£21.60 inc vat)
RECTANGULAR VENT 140mm x 68mm. Has a rocking insert with five rocking directional flaps. Mounts in a 120 x 50mm hole. Ideal for de-mist. Will accept our 63mm duct hose. #VENT4 £14 each (£16.80 inc vat)