This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
HEADLAMPS 4" HEADLAMPS Yes, only four inches (108mm) diameter. 130mm long. Mounts in a single 10mm hole. 150mm long leads. ’E4’ marked. Main, Dip and Side. H4 bulb + side. Weight only 0.65 Kg SATIN BLACK #HL4BK £52 each (£62.40 inc vat) CHROME #HL4CH £52 each (£62.40 inc vat) CARBON EFFECT
#HL4CA £56 each (£67.20 inc vat)
NOTE: THESE LAMPS HAVE A FLAT DIP BEAM PATTERN SO ARE OK FOR LHD or RHD CHECK SUITABILITY FOR IVA TEST
RUBBER HEADLAMP These are about as tough as a headlamp can get. Ideal for 4x4’s, Off-road buggies, Jeeps etc. Heavy weather- proof rubber housing. Sheathed wiring har- ness 900mm long. Main, dip and side light. 5¾" (shown) ‘E4’ marked. Overall size 160mm across, 110mm front to back, 170mm high. Plated steel adjustable mount- ing bracket with 5/16" bolt. #RHL5 £28 each (£33.60 inc vat)
CHROME TORPEDO HEADLAMP Beautifully chromed, 4 ½" Headlamp with H4 bulb and flat dip beam pattern.
Maximum diameter 121mm. Length 170mm. Height 140mm. Rocking mount with M10 x 22mm long mounting stud. 250mm long sleeved cable terminating in a 3 - spade, male headlamp plug. Weight 780gms. #HL4TOR £50 each (£60 inc vat)
BULBS NOT INCLUDED
(Takes H4 and our #BULB15)
WEIGHT ONLY 0.65 Kg
MINI CABLE TIE BASE For up to 5mm wide ties. Only 13mm x 18mm x 8mm high. 9mm diameter counter-bore will accept our M4 screws or 4mm pop rivet. #MCTBAS £2.50 pack of 25 (£3 inc vat)
WIRING COLOURS SOLDERED WIRE ENDS: BLACK — EARTH WHITE — DIP BEAM YELLOW — MAIN BEAM UNSOLDERED WIRE ENDS YELLOW — SIDE LIGHT + WHITE — SIDE LIGHT -