Timber
SR TIMBER URGES CAUTION WITH 100% SAFETY CLAIMS FOR BATTENS
100% safety claims for fooring battens are lulling roofers into a false sense of security, warns SR Timber, one of the leading distributors of specialist roofing battens and the renowned ‘Premium Gold’ battens.
As the industry has rightfully and successfully educated roofers into understanding that graded battens are much safer than upgraded battens and save both wastage and time, many roofing suppliers have sought to capitalise on this by promoting their product offering as being 100% safe.
Trading Director at SR Timber, Shaun Revill, explains, “Most of the graded battens that are currently available are generally of a high quality, but they should never be marketed as 100% safe. Battens are a natural product and even with graded products, there can be faults that could potentially prove lethal.”
Revill continues, “Roofers and builders working with graded battens still need to rely on fall arrest systems and duty of care, and in the event of any discrepancy in quality, the battens should be removed.”
The potential problems arising from the reliance on 100% safety claims could indeed prove fatal. Graded or ungraded, battens would immediately fail should roofers forget the duty of care and walk mid span at 600mm centres on 25 x 50 with an average weight including a load of tiles 15 stone. Equally, split ends at a joint butted onto the rafter is another point of weakness, and this again relies totally on the site operative and not the factory of origin. Whilst an amount of wane is expected in the BS, should it be fixed mid span, the strength of the batten could become weakened dependant on where it is fixed.
Revill concludes, “Wrongly believing that graded battens are 100% safe is rather like driving your car and never checking the tyres. By not implementing basic quality checks, roofers are playing Russian roulette with battens, and failing to make that one quick check and place a failing knot mid span could be very costly indeed.
“With the grading of battens, there will always be both human and mechanical error. Just as sawmills need to allow for this, roofers need to be aware of it too and approach 100% graded battens with a degree of sensibility.”
01332 204821
www.sr-timber.co.uk
Reader Enquiry: 40
26
READER ENQUIRY: 41
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52