Flaretite* Seals
The ideal product to Features Benefits
enhance new installations
Ribbed insert design Multiple surface contact
of SAE 37˚ connections, as
points
well as seal off minor leaks
Coated with Loctite** TY &
and weeping connections.
sealant Locks the joint and fills
Economical method to
surface imperfections
SPECIAL TRUCK HOSE
reduce minor leaks and Saves time & money
weeping connections associated with mainte-
Built-in clip to attach the
nance and rework
Flaretite seal to the nose Quick & easy assembly
of the SAE 37 degree
connection
Available sizes:
-04 through -32
LOW & MEDIUM PRESSURE HOSE
Flaretite Seal Standard Flared Connection
Joint Section of Applied Seal (Section)
Flaretite Seal, US Patent D398210
Reduced
with Custom Sealant & Locking Ribs
Coating
Flared End
Metal to Metal Flare
Stamping
Sleeve Seal across the
face of the connection
Imperfection in
HIGH PRESSURE HOSE
Tube Flare Sealed
by Coating
Patented Sealing
Rings of Flaretite
Tubing
Seal compressed to
Imperfection in
Nipple sealed by
1 degree max.
match mis-alignment
mis-alignment
of flared faces.
coating
Nipple JIC 37˚ Standard Flared Fitting Standard Flare Nut
Flared Tubing or Machined
& Sleeve
Flared Connection (Hose end)
HOSE FITTINGS
SEAL SIZE PACKAGE NUMBER OF SEALS
PART NUMBER PER PACKAGE
-04 FF13267 100

-06 FF13268 100
-08 FF13269 100
-10 FF13270 100
ADAPTERS & TUBE FITTINGS
-12 FF13271 100
-16 FF13272 50
-20 FF13273 50
-24 FF13570 25
-32 FF13571 10
Assembly and Torque During assembly ensure: Y INSTRUCTIONS
Requirements
The seal is fitted squarely
To assemble an SAE 37˚ to the conical nose of the
ACCESSORIES & ASSEMBL
connection using a Flaretite JIC fitting -37˚ flare.
seal, simply push the
The sealing faces of the
Flaretite seal onto the male
flared connector part are Y
portion of the connection.
clean and free of burrs.
The built-in clip will hold
the Flaretite seal onto the
The flared joint is correct-
male half.
ly tightened with recom-
mended torque settings
HOSE ASSEMBL
EQUIPMENT
noted below.
* Flaretite is a registered trademark
RECOMMENDED TORQUE SETTINGS:
of Flaretite Inc.
Tolerance: +10% -0%
All photos and the name Flaretite
-04 (1/4”) SAE 37˚: 14lb-ft. -10 (5/8”) SAE 37˚: 80lb-ft. -20 (1-1/4”) SAE 37˚: 190lb-ft.
are the property of Flaretite Inc.
-06 (3/8”) SAE 37˚: 26lb-ft. -12 (3/4”) SAE 37˚: 110lb-ft. -24 (1-1/2”) SAE 37˚: 220lb-ft.
** Loctite is a registered trademark of
Henkel Loctite Corporation.
-08 (1/2”) SAE 37˚: 55lb-ft. -16 (1”) SAE 37˚: 140lb-ft. -32 (2”) SAE 37˚: 325lb-ft.
APPENDICIES
www.EatonProducts.com
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007 299
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50