Crimp Assembly Equipment
FT1380
The ProCrimp 1380 crimp
ET1280
Eaton is proud to add the
TY &
machine from Eaton crimps ET1280 crimp machine to
all your hose needs up to and
its line of crimpers. While SPECIAL TRUCK HOSE
including –20 SAE100R12
being one of our most eco-
hose styles and the popular
nomical crimp machines to-
MatchMate Plus hose and
date, the new ET1280
fittings program (shown with
machine boasts a broad
optional die holder kit
FT1380–2–4). The ProCrimp
crimp capability with an
1380 is electronically con-
ease-of-use that is sure to
trolled to give fast, accurate
please hose assemblers.
crimps the first time and
The new ET1280 will han-
every time you need a hose
dle virtually all hose styles
LOW & MEDIUM PRESSURE HOSE
assembly. The electronic key-
through –20 SAE100R12
pad is easy to adjust, with up hose and fittings. All die
to 10 programmable crimp cages, crimp diameters and
settings. For hose styles and approved hose and fitting
sizes used less frequently
combinations are identical
simply enter the 3 digit code
to the popular FT1380 & FT1380P crimp machines.
of that hose.
Ordering Instructions
The ET1280 also comes in two configurations. The
FT1380–115 115V crimp machine 50/60 Hz
adjustable model allows the machine to be oriented to the
preferred angle that the operator desires. This adjustable
HIGH PRESSURE HOSE
FT1380–115–5 2-Wire braid hose package FT1380–115 with
model may be ordered separately or with your choice of
the 5 die cages needed to crimp the 5 most
popular GH793 or GH781 2-wire hose sizes:
three power options, including a high volume hand pump,
–4, –6, –8, –12 and –16
a turbo air/hydraulic power unit or a 12-volt DC power unit.
Die Cages
The upright model comes standard with a work light and a
FT1380–200–M150
110-volt, 50/60 Hz, 1.5 HP electric power unit.
FT1380–200–M210
FT1380–200–M240
Ordering Instructions
HOSE FITTINGS
FT1380–200–M320
Crimp Machine Part Numbers
FT1380–275–M370
ET1280-001 No pump, no tooling
FT1380 –115– 8 Braided and spiral hose package
ET1280-002 2-Stage hand pump, no tooling
FT1380–115–5 with the 3 additional die
cages — capable of crimping all MatchMate
ET1280-003 Turbo air/hydraulic pump, no tooling
Plus hoses through –20
ET1280-004 12 VDC pump, no tooling
Die Cages
FT1380–200–M180
ET1280-005 110 volt, 1-1/2 HP electric pump, no
FT1380–200–M280
tooling (upright model)
ADAPTERS & TUBE FITTINGS
FT1380–275–M465
* Must also order FT1380-275-M420 to
Crimp Machine Package Part Numbers
crimp GH194-20 and GH663-20
ET1280-006 No pump, 8 Die Cages
FT1380–2–3 FT1330 to FT1380 Die Cage conversion kit
ET1280-007 2-Stage hand pump, 8 Die Cages
— back plate, bolts and instructions neces-
sary to convert an FT1330 die cage to an
ET1280-008 Turgo air/hydrauic pump, 8 Die Cages
FT1380 die cage. Simply remove the
ET1280-009 12 VDC pump, 8 Die Cages
FT1330 back plate and replace it with the
Y INSTRUCTIONS
new FT1380 back plate.
ET1280-010 110 volt, 1-1/2 HP electric pump, 8 Die
Cages (upright model)
FT1380–2–4 Optional die holder kit — Kit includes 4 die
ACCESSORIES & ASSEMBL
holder plates each of which will hold 2 die
ET1280-011 No pump, 5 Die Cages
cages. Holes are pre-drilled on base of
ET1280-012 2-Stage hand pump, 5 Die Cages
ProCrimp machine to accept these 4 plates. Y
ET1280-013 Turbo air/hydraulic pump, 5 Die Cages
FT1380-4 Optional fitting backstop-kit includes backstop
and
5
/
32
” hex wrench. The backstop allows the
ET1280-014 12 VDC pump, 5 Die Cages
1380 to crimp PTFE hose and be utilized for a
ET1280-015 110 volt, 1-1/2 HP electric pump, 5 Die
fitting locator to increase efficiency.
Cages (upright model)
HOSE ASSEMBL
EQUIPMENT
Electrical Requirements Canada: FT1380–115
5 Die Cages 8 Die Cages
USA: FT1380–115 standard
standard machine.
FT1380-200-M150 Includes the 5 Die Cages plus:
machine uses 115V, 50/60
Requires CSA (Canadian
FT1380-200-M210 FT1380-200-M180
Hz, 1.5 hp
Standards Associ ation)
approval.
FT1380-200-M240 FT1380-200-M280
Brazil: FT1380–1–2 standard
machine uses 230V, 50/60
The FT1380–115 is CSA
FT1380-200-M320 FT1380-275-M465
Hz, 1.5 hp
approved and is so noted
on the nameplate.
FT1380-275-M370
APPENDICIES
Australia: FT1380–230 stan-
dard machine uses 230V,
50/60 Hz, 1.5 hp
www.EatonProducts.com
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007 327
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50