Standard (mandrelless) reusable fittings with
TRUCK HOSE SPECIAL
engine, air brake and railroad air brake hose
1531, 1531A, 2550, 2554, 2570
TY &
(for fittings requiring mandrel, see page 324)
PRESSURE HOSE LOW & MEDIUM
Step 1 Step 2
Step 3 Step 4
HIGH PRESSURE HOSE
Cut hose square to length Put socket in vise. Screw
Lubricate nipple threads Screw nipple clockwise into
required with fine-tooth hose counterclockwise into
and inside of hose LIBER- socket and hose. Leave a
hacksaw or cut-off wheel. socket until hose bottoms.
ALLY with Aeroquip
1
/
32
” to
1
/
16
” clearance
Clean hose bore. Back off
1
/
4
turn.
222070 hose assembly between nipple hex and
When assembling long
lube or heavy weight oil. socket.
lengths of hose, it may be
Recommendations for
preferred to put hose in vise
cleaning, inspection and
just tight enough to prevent
testing are summarized on
from turning, and screw
page 318. Dis assemble in
HOSE FITTINGS
socket into the hose coun-
reverse order.
terclockwise until it bot-
toms. Back off
1
/
4
turn.
NOTE: For 2550, 2554 and
2570 hose: Sockets for
these hose fittings are
furnished with internal
annular grooved design.
Install socket by pushing
TUBE FITTINGS
ADAPTERS &
hose into socket with a
back and forth rocking and
twisting motion until hose
bottoms on shoulder of
socket. Back off
1
/
4
turn.
ASSEMBL ACCESSORIES &
Y INSTRUCTIONS
EQUIPMENT HOSE ASSEMBL
Y
APPENDICIES
www.EatonProducts.com
322 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50