This page contains a Flash digital edition of a book.
Hose and Reusable Fittings
TRUCK HOSE SPECIAL
TY &
Mandrel Type Fittings— Nipple and clamp with suction hose
Standard reusable fittings with single wire 2661, FC619
braid, multiple textile braid, hydraulic, LPG
hose, engine and air brake hose
PRESSURE HOSE LOW & MEDIUM
FC234, FC300, FC321, FC350, FC355, 302A,
303, 1503, 2580, 2651
HIGH PRESSURE HOSE
Step 1 Step 3
Step 1 Step 3
Cut hose square with fine- MALE ENDS: Push assem-
Cut hose square to length Evenly space two band
tooth hacksaw or cut-off bly tool into nipple.
required using a fine-tooth clamps from end of hose to
wheel. Clean hose bore.
hacksaw or cut-off wheel. end of nipple (see above).
HOSE FITTINGS
SWIVEL ENDS: Tighten nip-
ple and nut on assembly tool.
Clean hose bore. Slide band The band clamps should be
clamp over hose cover. tightened 180˚ from each
Lubricate nipple, mandrel
other. Tighten clamps to 100
and inside of hose liberally.
in-lbs. Recommendations
Use heavy oil or Aeroquip
for cleaning, inspection and
222070 hose assembly lube.
testing are summarized on
page 318.
TUBE FITTINGS
ADAPTERS &
Step 2
Put socket in vise.
Screw hose counterclock-
Step 2
wise into socket until it bot-
ASSEMBL ACCESSORIES & toms.
Insert nipple into hose until
hose end bottoms on nipple
When assembling long
Step 4
shoulder.
Y INSTRUCTIONS
lengths of hose, it may be
preferred to put hose in MALE ENDS: Screw nipple
vise just tight enough to clockwise into socket and
prevent from turning, and hose. Leave a
1
/
32
” to
1
/
16

screw socket onto the hose clearance between nipple
counterclockwise until it hex and socket.
bottoms.
SWIVEL ENDS: Screw nipple
Back off
1
/ clockwise into socket and hose.
EQUIPMENT HOSE ASSEMBL
4
turn.
Back off FC300, FC350 and
Leave
1
/
32
” to
1
/
16
” clearance
FC355 hose
1
/
between nut and socket.
4
to
1
/
2
turn.
Recommendations for clean-
ing, inspection and testing are
Y
summarized on page 318.
Dis assemble in reverse order.
APPENDICIES
www.EatonProducts.com
324 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50
Produced with Yudu - www.yudu.com