ET1000 Portable, Light Duty, Positive Stop
TRUCK HOSE SPECIAL
Crimp Machine
TY &
Eaton is proud to add the Features Benefits
ET1000 crimp machine to
Pusher slides out of Sliding pusher allows for
its line of portable
position. easier fitting insertion
crimpers. While being our
PRESSURE HOSE LOW & MEDIUM
most economical crimp
Compatible with the
into the machine.
machine to-date, the new
Aeroquip MatchMate Simple positive-stop
ET1000 machine boasts a
Plus hose and fittings. crimp diameter control
broad crimp capability with
Can be mounted on
system for
an ease-of-use that is sure
service vehicles due to
consistent crimping time
to please hose assemblers.
its portable design.
after time with no opera-
tor
This new crimp machine
Can be powered with
adjustments required.
HIGH PRESSURE HOSE
has been approved to
virtually any 10,000 psi
crimp:
hydraulic
Easily transported
All 1-wire and 2-wire
power source (min. 36
between job sites.
braided MatchMate Plus
cubic inch pump reser- Versatile power
hoses in sizes
1
/
4
”
voir capacity). source options.
through 1
1
/
4
” using
Utilizes 2-piece collet Electricity is
MatchMate Plus TTC
assemblies. required only
fittings.
Spacer rings control the
when using an
All 4-wire spiral
crimp diameter.
electric style
pump.
HOSE FITTINGS
MatchMate Plus hoses
in sizes
3
/
8
” through 1”,
using MatchMate Plus
TTC12 fittings.
Specifications
The new ET1000 crimp Dimensions-22 inches high, 16 inches wide,
machine builds on the suc-
14 inches in depth
cess of the prior FT1370 Weight 70 lbs. (without pump)
portable crimp machine by
using the same basic frame
TUBE FITTINGS
ADAPTERS &
and construction design,
ET1000 Crimp Machine Part Numbers
but employs a 2-piece split
half collet assembly in lieu
For tooling and crimping information, refer to the
of the traditional ProCrimp
Collet/Spacer Ring Selector Chart, A-EQCR-MG001-E.
die cages. The correct hose
All part numbers include the basic crimp machine.
assembly crimp diameter is
ET1000-001 = No pump, no tooling (basic machine only)
obtained by the use of a
ET1000-002 = Hand-pump, no tooling
ASSEMBL ACCESSORIES &
spacer ring that controls the
stroke length of the cylinder
ET1000-003 = Air/hydraulic pump, no tooling
during the crimping opera-
ET1000-004 = 110 volt 1/2HP electric pump, no tooling
Y INSTRUCTIONS
tion. ET1000-005 = 12 V DC pump, no tooling
This new crimp machine
may be ordered separately
or with one of four power
ET1000 Crimp Machine Package Part Numbers
supplies: hand-pump,
These machine packaged part numbers offer a variety of pumps with the same tooling package including
air/hydraulic pump, 12-volt
all collets and spacer rings to crimp:
DC power unit, or a 110-volt 1-wire and 2-wire braided MatchMate Plus Hoses (sizes
1
/
4
” through 1
1
/
4
”) using TTC fittings
EQUIPMENT HOSE ASSEMBL AC power unit.
GH493, 4-wire spiral MatchMate Plus Hose (sizes
3
/
8
” through 1”) using TTC12 fittings
ET1000-006 = No pump, but includes complete MatchMate Plus Collet and Spacer Ring Tooling package described above
ET1000-007 = Air/hydraulic pump, and complete MatchMate Plus Collet and Spacer Ring Tooling package described above
Y ET1000-008 = 110 Volt electric pump, and complete MatchMate Plus Collet and Spacer Ring Tooling package described above
ET1000-009 = 2-Stage hand pump, and complete MatchMate Plus Collet and Spacer Ring Tooling package described above
ET1000-010 = 12 Volt DC pump, and complete MatchMate Plus Collet and Spacer Ring Tooling package described above
APPENDICIES
www.EatonProducts.com
328 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50