S1104 Hose Specifications Electrical Requirements
TRUCK HOSE SPECIAL
Hose cut off machine
Single and Double 3 hp, 230/460V, 3 phase,
Wire Reinforced, 60 Hz.
1
TY &
/
4
” to 3” I.D.
Machine wired for 230V
Four and Six Spiral Wire AC. Change connections as
Reinforced,
1
/
4
” to 1
1
/
2
” shown on motor plate for
I.D. with optional blades 460V. Also, replace 230V
FT1101–1 and FT1101–2, motor heater with 460V
spiral wire capacity is motor heater included
PRESSURE HOSE LOW & MEDIUM
increased to 2” with machine.
Features
Ordering Instructions
Compact, 22” x 24”
Machine:
Light, 130 lbs.
S1104 Basic machine, 230/460V, 3 phase, 60 Hz
Dual V-belt drive
S1026 Hose measuring gauge attachment
FT1215 Hose reel attachment
HIGH PRESSURE HOSE
10” cutting blade
U.L. listed
S1118 Coolant spray system
(required when cutting spiral wire hose)
SC1709 10” Replacement cutting blade
*A 3 hp, 230V AC, single phase SC1772 Welded steel table
machine is also available but not rec-
ommended because of reduced torque
Optional Cutting
and less capability when cutting larger
Blades
size hose. Order by part number
S1104–230. FT1101–1
FT1101–2
HOSE FITTINGS
10" Scalloped Blade
10” Abrasive Blade
TUBE FITTINGS
ADAPTERS &
FT1260 Hose Specifications Ordering Instructions
Hose cut off machine
All Hose Constructions –
Machine:
1
/
4
" to 4" I.D.
FT1260–1–1 Base machine with
stand. 230/460V, 3 phase, 60 Hz
ASSEMBL ACCESSORIES & Features
FT1260–1–2 Base machine with stand and fume
Built in safety features
exhauster. 230/460V, 3 phase 60 Hz
Y INSTRUCTIONS
Easy to operate
FT1260–1–3 Base machine with stand. 230V, single
16" abrasive wheel
phase, 60 Hz
Heavy duty design
FT1260–1–4 Base machine with stand and fume
Low maintenance
exhauster. 230V, single phase, 60 Hz
V shaped vise
FT1260–2–5 Optional hood (can be used only with the
–1–2 and the –1–4 models) Eaton
U.L. listed
EQUIPMENT HOSE ASSEMBL
recommends the use of FT1260–2–5,
optional hood.
Replacement Electrical Requirements
Components:
Electrical requirements will
Y
FT1260–3–1 vary depending on options
Replacement 16” fiberglass selected.
reinforced abrasive wheel
Contact Eaton for additional
information.
APPENDICIES
www.EatonProducts.com
338 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 December 2007
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50