exhibition preview | NPE 2015
Right: Multi- shot moulding
features on the MGS booth
construction that is said to ensure a leak-proof seal even in the most demanding applications. The TL-35 is configurable with flow bores ranging
from 14-18 mm diameter and in lengths from 150- 600mm. Able to handle a range of engineering materials, the nozzle is pitched at applications in the appliance, automotive and industrial sectors. ❙
www.mastip.com
RJG Booth W1386 MGS Mfg Group Booth W3902
Plastics tooling and automation specialist MGS Mfg Group will be demonstrating its latest in-mould assembly and multi-shot moulding innovations at NPE. The company will demonstrate production of a
Below: Mastip’s TL35 Nozzle
medical closure with a moulded-in gasket and septum on a KraussMaffei moulding machine fitted with the company’s proprietary auxiliary vertical and horizontal injection units and four position servo-driven rotary turntable. The system also includes an in-mould servo-driven unscrewing feature which operates while the mould is closed and pneumatic side ejection during the opening stroke/rotation to save cycle time. MGS will also show an automated high speed
continuous motion assembly system configured for operation in a medical environment, as well as an auxiliary injection unit for processing LSR. ❙
www.mgstech.com
Mastip Technology Booth W8191
Mastip Technology will launch its TL-35 threaded nozzle, which expands its offering for large part applications where a drop-in pre-assembled hot runner system is desired. By threading directly into the manifold, the TL-35 creates a robust
NPE 2015
Dates: Venue:
Hours: Tickets:
Monday 23 March – Friday 27 March 2015
Orange County Convention Center, 9800 International Drive, Orlando, FL 32819, USA Mon-Thu 9:00am-5:00pm (Fri 9:00am-3:00pm)
Advanced Registration: $145; On-Site Registration: $200 (Valid for full duration)
Organiser: Society of the Plastics Industry (SPI), 1425 K Street NW Suite 500, Washington, DC 20005, USA
Website:
www.npe.org 68 INJECTION WORLD | March 2015
Moulding optimisation specialist RJG will introduce a number of new products at the show. The new Lynx DIN Rail modules feature fully shielded enclosures and cables to eliminate the risk of interference in electrical- ly-noisy environments and to simplify installation. A new Multichannel Strain Gauge makes it easier and less costly to implement strain gauge pressure sensors in high cavitation moulds by moving the adaptor off the mould. The company will also exhibit its latest Lynx 8 channel piezo adaptor and Tool Room Sensor Tester. ❙
www.rjginc.com
Reiloy Westland Booth W3543 Screw and barrel manufacturer Reiloy Westland will introduce an updated version of its Eagle low shear mixer. The Reifenhaüser Group company says the new mixer concept offers both disper- sive and distributive mixing of the polymer without introducing excessive levels of shear. The new design can integrated into screw designs for injection moulding applications. ❙
www.reiloy.com
StackTech
Above: Reiloy
has updated its Eagle low
shear mixer
Booth W1375
Canadian packaging mouldmaker StackTeck Systems will show the latest variation of its TRIM (Thin Recess Injection Moulding) mould technology for production of long flow length thin wall parts at NPE. The prototype component tub measures 175mm by 140mm by 55mm and has a wall thickness of 0.25mm at the thinnest point. The length to thickness ratio is more than 500. The part weighs 35% less than a traditional alternative. Aside from the TRIM mould, the company will have other static exhibits on its stands while five more moulds will be in operation on partner booths. ❙
www.stackteck.com
www.injectionworld.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74