news digest ♦ Lasers Behroozpour)
The new system, developed by researchers at the University of California, Berkeley, can remotely sense objects across distances as long as thirty feet, ten times farther than what could be done with comparable current low-power laser systems.
With further development, the technology could be used to make smaller, cheaper 3-D imaging systems that offer exceptional range for potential use in self-driving cars, smartphones and interactive video games like Microsoft’s Kinect, all without the need for big, bulky boxes of electronics or optics.
“While metre-level operating distance is adequate for many traditional metrology instruments, the sweet spot for emerging consumer and robotics applications is around ten metres,” or just over thirty feet, says UC Berkeley’s Behnam Behroozpour.“This range covers the size of typical living spaces while avoiding excessive power dissipation and possible eye safety concerns.”
The new system relies on LIDAR (light radar), a 3-D imaging technology that uses light to provide feedback about the world around it. LIDAR systems of this type emit laser light that hits an object, and then can tell how far away that object is by measuring changes in the light frequency that is reflected back. It can be used to help self-driving cars avoid obstacles halfway down the street, or to help video games tell when you are jumping, pumping your fists or swinging a racket at an imaginary tennis ball across an imaginary court.
In contrast, current lasers used in high-resolution LIDAR imaging can be large, power-hungry and expensive. Gaming systems require big, bulky boxes of equipment, and you have to stand within a few feet of the system for them to work properly, Behroozpour says. Bulkiness is also a problem for driverless cars such as Google’s, which must carry a large 3-D camera on its roof.
The researchers sought to shrink the size and power consumption of the LIDAR systems without compromising their performance in terms of distance.
In their new system, the team used a type of LIDAR called frequency-modulated continuous-wave (FMCW) LIDAR, which they felt would ensure their imager had good resolution with lower power consumption, Behroozpour says. This type of system emits “frequency - chirped” laser light (that is, whose frequency is either increasing or decreasing) on an object and then measures changes in the light frequency that is reflected back.
To avoid the drawbacks of size, power and cost, the Berkeley team exploited a class of lasers called MEMS tuneable VCSELs. MEMS (micro-electrical-mechanical system) parts are tiny micro-scale machines that, in this case, can help to change the frequency of the laser light for the chirping, while VCSELs (vertical-cavity surface-emitting lasers) are a type of inexpensive III-V integrable semiconductor lasers with low power consumption. By using the MEMS device at its resonance - the natural frequency at which the material vibrates - the researchers were able to amplify the system’s signal without a great expense of power.
“Generally, increasing the signal amplitude results in increased power dissipation,” Behroozpour says. “Our solution avoids this tradeoff, thereby retaining the low power advantage of VCSELs for this application.”
The team’s next plan includes integrating the VCSEL, photonics and electronics into a chip-scale package. Consolidating these parts should open up possibilities for “a host of new applications that have not even been invented yet,” Behroozpour says - including the ability to use your hand, Kinect-like, to silence your ringtone from thirty feet away.
Behnam Behroozpour will describe the team’s work at CLEO: 2014, in presentation AW3H.2, titled, “Method for Increasing the Operating Distance of MEMS LIDAR beyond Brownian Noise Limitation,” which will take place on Wednesday, June 11th at 4:45 p.m. in Room 210H of the San Jose Convention Centre
The Conference on Lasers and Electro - Optics (CLEO) is being held from June 8th to 13th in San Jose, California, USA at San Jose Convention Centre.
Daylight delivers first laser-based IR microscopy platform
The Spero microscope uses the firm’s Quantum Cascade Laser technology. It is suited specifically for the mid-infrared spectral imaging analysis of biomedical and materials research samples
Daylight Solutions, a manufacturer of molecular detection and imaging solutions in the mid-infrared, has announced delivery of what it claims is the world’s first commercially available laser- based infrared microscopy platform.
The company’s advanced microscope was delivered to Rebekah Drezek’s Optical Molecular Imaging and Nanobiotechnology Laboratory at Rice University in Houston, Texas.
The system will initially be used to conduct cutting-edge research into laser-based infrared microscopy for the optical diagnosis of breast cancer.
3-D schematic showing MEMS-electronic-photonic heterogeneous integration (Credit: Niels Quack)
88
www.compoundsemiconductor.net June 2014
“We are delighted to have received the Spero IR microscopy system,” states Drezek. “The combination of spectral tuneability and rapid imaging in these wavelength ranges is
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108