chromatography • spectroscopy 43
Analysis of contaminants in or on products is very important for both safety and quality purposes. Te size of the contaminants of interest has decreased significantly to 10 µm or less.
Analysing such ultra-small samples requires high-sensitivity FTIR spectrophotometers. In addition to sensitivity, customers require easy-to-use software packages that provide rapid results. Lastly, FTIR systems need to offer rapid scan modes in order to monitor ultra-fast reactions.
Te IRTracer-100 was developed with these requirements in mind. Featuring improvements in interferometer and detector design, it offers high sensitivity with a 60,000:1 SN ratio. Combined with the LabSolutions IR Contaminant Analysis Macro, this sensitivity enables easier, quicker and more accurate analysis of small samples.
High-speed reaction monitoring software allows a maximum of 20 spectra/second to be obtained. Tis makes the IRTracer-100 suitable for ultrafast reactions that occur within a few seconds, and for kinetics studies occurring in less than one second.
Optimised for network applications, LabSolutions IR CS enables connection to a laboratory’s network of analytical instruments, including LC and GC. Tis unifies data management and provides for more secure, more efficient user administration.
In addition, LabSolutions IR features libraries containing nearly 12,000 spectra, allowing for easier identification of unknown samples.
Lastly, the novel ‘Easy Macro’ program allows users to create macros for routine work by simply selecting and aligning operations from a list. Tis
improves productivity and allows even novice FTIR users to easily operate the IRTracer-100.
Ultra low noise and 2D scanning New from BaySpec is the xSG SuperGamut line of extended near-infrared spectrometers with improved wavelength coverage and ultra-low noise operation.
According to the company, the new line features the highest throughput and fastest optics on the market for a roughly six-fold higher signal/noise improvement over traditional Czerny-Turner reflective grating based designs.
Standard detector ranges are available covering 900–1700nm, with extended cut-offs at 1950nm, 2050nm, 2250nm and 2550nm. As the VPG gratings are made in-house with total control over the design, the spectral range can be customised for optimal resolution in the range of interest all at no additional charge.
LOT-QuantumDesign – Your partner in Europe:
www.lot-qd.com
We offer products for: Imaging
Life sciences
Material characterization Modular optical spectroscopy Molecular interaction Nanotechnology Photonics Interface/Surface characterization
More than120 people in over countries are at your service.
20 European
European headquarters
LOT-QuantumDesign GmbH Im Tiefen See 58 D-64293 Darmstadt Germany
info@lot-qd.de +49 6151 8806-0
www.lot-qd.com
“Analysis of contaminants in or on products is very important for both safety and quality purposes. The size of the contaminants of interest has decreased significantly to 10µm or less”
For more information ✔ at
www.scientistlive.com/eurolab
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68