Advertorial
SHOWCASE Quick-Fit steam
trapping station saves energy and cuts carbon emissions
ore energy efficient steam systems are the promise of the new STS17.2 steam trapping station launched by Spirax Sarco in an expansion of its Quick-Fit steam trap range. The STS17.2 comprises isolation valves, steam trap connector with strainer and a check valve in a sleek modular body, supported by a 10-year warranty for total peace of mind. A steam trap can be replaced in minutes instead of hours, enabling steam systems to be kept at peak performance and energy efficiency. Plant downtime is also reduced significantly.
M Traditionally, steam traps
are welded or screwed into the pipeline and considerable work is needed to replace them. Often this means that an underperforming steam trap needing maintenance is left in place for a significant period until safe access can be
arranged.The single-piece body of the STS17.2 also virtually eliminates the potential leak paths caused by screwed connections that conventional steam trapping stations and on-site fabricated installations typically suffer.
Spirax Sarco Tel: 01242 535319 Web:
www.spiraxsarco.com/uk enter 828
ressure-management specialist Elfab has introduced a range of pre-torque holders for its metal rupture discs. The new range has been specifically designed to cope with installations where it is difficult to remove the disc and holder separately from the flange, and to reduce both the risk of the disc slipping or of either component becoming damaged. The pre-torque holders are supplied in either forward- or reverse-acting formats, and have been designed to be compatible with Elfab’s unique magnetic burst detection system, Flo-Tel™+, in keeping with the rest of the company’s holder range. Available in stainless steel as standard, the new holders offer a high level of corrosion resistance. They have been produced to comply with all internationally recognised flange standards. The pre- torque holders will allow even more rupture disc users to benefit from Elfab’s technically advanced designs and detection.
New pre-torque holders facilitate difficult rupture disc installations P
Elfab Ltd. Tel: 0191 293 1234 Web:
www.elfab.com enter 829
egger’s new high-voltage insulation resistance testers (IRTs) offer exceptional versatility in a compact, rugged and light unit that weighs little more than half as much as its predecessors. Capable of providing accurate measurements up to 10 TΩ for 5 kV versions and 20 TΩ for 10 kV versions and having facilities for automatic timed IR tests and more advanced diagnostic tests; PI,
Get your MITs on Megger’s new insulation testers! M
DAR, DD, SV and ramp tests. The new instruments also provide enhanced productivity – they can be used from an AC source even when their internal rechargeable battery is fully discharged – and they are capable of delivering dependable results even in noisy electrical environments, such as electricity substations, with noise levels up to 3 mA. Megger’s new IRTs are available in three versions. The MIT515 is an entry-level 5 kV test set which offers insulation resistance (IR), timed insulation resistance (IR(t)), dielectric absorption ratio (DAR) and polarisation index (PI) test modes.
Megger Tel: 01304 502100
BackPack™ Valve Actuator N
EFD International, Dunstable, U.K. Tel: 01582 666334
Web:
www.megger.com enter 830
enter 831
ew innovative device from EFD for improving productivity of EFD dispense valves even further: The new actuator enables to produce more products in less time by making it possible to cycle select Nordson EFD valves 2 – 3 times faster than previously feasible. The faster valve actuation also enables to produce smaller fluid deposits in accurate, repeatable amounts. Incorporating advanced miniature solenoid technology, the innovative BackPack mounts the solenoid used to open and close the valve directly on the valve’s air cylinder, rather than on a separate fixture. This makes it possible to achieve valve actuation speeds as short as 5 - 6 milliseconds and cycle rates as high as 800 per minute.
Email:
europe@nordsonefd.com Web:
www.nordsonefd.com
Gauge your performance against the best in the industry with ABB’s new online survey
ABB has launched a new online survey that can instantly gauge plant
processes and instrumentation performance against industry benchmarks. Located at
www.howdoyoumeasureupabb.com , the survey aims to provide a snapshot of whether organisations are fully maximising the potential of their installed instrumentation and control systems in the chemical, oil and gas industry. ABB commissioned an independent research company to determine performance against ten key industry process performance indicators, as well as to assess the average performance of organisations in these areas. On completion of the survey, respondents are presented with a personalised infographic, comparing their answers against established industry norms. A total score out of 100 is attributed, as well as a commentary on how plant processes measures up. Quick and free to use,
it's simple to find out how your process measures up: Step one: Log onto
www.howdoyoumeasureupabb.com Step two: Submit the short 10 question survey. Step three: Sit back and read the personalized infographic detailing the results and commentary. Step four: Surprised about your results, or secretly smug? Comment on your findings with the rest of the industry by joining the ‘How do you measure up?' Linkedin group or using #measureup on Twitter.
ABB 30 Tel: 0870 600 6122 Web:
www.abb.co.uk enter 832
Variety of models highlights solutions capabilities
he UK exhibition debut of its new tray sealer model at the PPMA Show, together with latest examples of its advanced weighing, packing, detection and quality control equipment, underline Ishida Europe’s capabilities in delivering complete packing line solutions for a wide variety of products and
applications.Alongside the new QX-775-Flex tray sealer, Ishida will show models from its CCW-R multihead weigher, DACS checkweigher, IX X-ray system and SPA Strip Pack Applicator ranges, along with its iTPS™ complete packing line solution for snacks. The QX-775-Flex combines a compact design with high speeds for MAP (Modified Atmosphere Packaging) trays of up to 15 cycles per minute, along with maximum hygiene and high quality pack and product presentation.
T The system is also
compatible with a variety of applications including standard MAP, skinpack and shrink film, making it ideal for all types of ready meals, meat, poultry, fish and salads.
The tray sealer offers a high return on floor space through its compact design and high output capability, and can also be easily integrated to form part of a complete packing line.
Ishida Europe Ltd. Tel: 0121 607 7700 Web:
www.ishidaeurope.com
Hall 5, Stand C51 enter 833
JULY/AUGUST 2012 Factory Equipment
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56