Page 26
www.us-
tech.com
Test for gross and fine leaks in as little as 6 minutes.*
December, 2011
K&F Electronics Adds Combo Stripper/Etcher
Fraser, MI — K & F Electronics has added a brand new Chemcut 547 XLI strip etch strip line. The new machine is expected to make the company’s etching process even faster by adding a strip line to the beginning of the etch process. This will also permit etching very thin core PCBs. Before the new installa-
Only NorCom optical leak technology detects both gross and fine leaks in hermetically sealed packages, this fast. Instead of using multiple technologies
and processes, you can leak test virtually any type of package with one high-speed system. The NorCom 2020™
series inspects hermetically sealed components to
MIL-STD 883 requirements either in seam seal trays, or when already mounted to circuits boards and assemblies. It automatically rejects failed devices, and reports the leak rate for each part, eliminating “divide and conquer” leak testing.
NorCom 2020™
Try it free. Send us your package samples today, for a leak test evaluation and report at no charge. *Note: Test time is dependent on package volume
www.norcomsystemsinc.com
610-592-0167 1055West Germantown Pike Norristown, PA 19403 USA
tion, the company’s strip line was separate from its etcher. The new machine has reduced the handling time required, since a single machine is replacing what had previously been a separate strip line and etcher. It is anticipated that the new
setup will not only save time for the company and its customers, but will help to keep a lid on costs. The com-
pany is currently performing time checks to determine how much of a price reduction it can offer to cus- tomers.
New combo stripper and etcher. Contact: K & F Electronics, Inc.,
33041 Groesbeck Hwy., Fraser, MI 48026 % 586-294-8720 fax: 586-294-5999 E-mail:
skincaid@circuitboards.com Web:
www.circuitboards.com
BTU: New Metallization Firing System
North Billerica, MA — BTU International is introducing the TRITAN™ HV90 metal- lization firing system for sili- con photovoltaics. The new dual-lane metal-
lization firing system provides increased throughput at 3600 wafers per hour, an edge belt, volatile organic compound (VOC) abatement and a single zone spike with less than 3 seconds spike time. The firing system uses
the company’s special technol- ogy, TriSpeed™, which allow- ing users to take advantage of supe- rior ramp rates — up to 200°C per second —while not compromising the drying and cooling sections of the profile. The three-belt, three-speed system provides exceptional control of profile development. In trials, TRI- TAN has consistently shown an improvement in fill factor resulting
Dual-lane metallization firing system.
in increased efficiency. This, com- bined with its low cost of ownership, enables customers to achieve the lowest cost per watt. Contact: BTU International, 23
Esquire Road, North Billerica, MA 01862 % 978-667-4111 fax: 978-667-9068 Web:
www.btu.com
NEW: Kardex Remstar Megamat RS
The best of both worlds: The fusion of reliability and security in a new generation of storage technology.
Call for Information: 800-639-5805
Experience innovation: Keep goods at your fi ngertips with the push of a button. High density storage: saving space, time and money.
Kardex Remstar is one of the world‘s leading providers of automated storage and materials handling solutions.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84