DTG Advice
How to achieve perfect DTG printing on to dark shirts
Direct to garment printing on to dark shirts has been a challenge over the years, mainly because the operators have been missing one or more of the important processes.
Amaya Sales UK’s MD, Peter Wright, explains further. I
f you visit trade shows, Iʼm sure you will have noticed the difference in quality in the samples that the suppliers give you.
I find it hard to believe that a supplier of a product would give you an inferior print sample when they are trying to sell their products, but it does happen. Maybe the perceived value of quality is different from one supplier to the next. So, how do you give yourself the best possible chance of creating the perfect DTG print?
Use the best art file possible
The best type of file is a vector format because it can be sized up or down without reducing the quality. So ask your customer if they can supply a PNG, PSD or EPS file. If they can only supply a JPG file, ask to send in the size they want printed and at 300dpi. The issue with a JPG type file is that it limits your ability to manipulate it. Ideally the PNG file is best because it already as a transparent background. You can them automatically cut out the background on your DTG rip software.
Use the best possible garment
The most suitable garment for DTG printing is made of 100% ring spun cotton. The DTG water-based inks are made specifically for printing on to cotton fabrics. Tightly woven fabrics will give a crisper more accurate finish than a loose weave such as a polo type.
Ask your equipment supplier for their suggestions on the best garment to use. You can DTG print on to most quality shirts but to achieve the premium quality the ring spun ones are much better. You can also print on to blended fabrics and recommendations are up to 50/50% polyester but the image will never be as bright as on 100% cotton.
Pre-treating
Consistent pre-treating is the secret to a perfect quality print. Operators often blame other factors but a good pre- coat applied evenly will normally solve most quality issues. You need to apply the optimum amount to the garment for best results. If you apply too little, the design will look weak or patchy. If you apply to much the design may look fine but there is a chance that the ink will wash off. This is because the ink is laying on the pre-coat and not into the fabric. Achieving the best results requires a little practice so please try different garments and spray levels until you are satisfied. You could of course purchase an automatic pre-treater. On the better ones you will have two or four spray nozzles to give uniform spraying and you can also control the amount of liquid laid down. These type of machines take away all the guess work. Remember, once you get pre-treating correct your designs will improve dramatically.
| 60 | October 2016
Keep these tips in mind
White ink control
Most DTG printers have their own RIP software that allows you to control ink flow amounts, size and positioning. Normally you do not need the maximum white ink to be laid down to produce the best quality print. Experiment with lowering the white ink amount by say 10 or 20% and I think will not see the difference. You can get to a point where too much white ink can affect the quality. Just remember that a good white layer will really enhance the top CMYK colours and give you a crisp and vibrant finish.
Finishing off the printed garment
When you have printed your garment you will have to dry the ink on a heat press. Make sure you have a good quality press and preferably one that hovers. Sometimes your garment will come off the printer looking perfect but after heat pressing it becomes dull. This often depends on the amount of ink you put down. One way to combat this is to place the garment on the press and hover the top plate over the garment for about a minute and then use a not to heavy pressure to finally cure it.
Keep these tips in mind and you should be able to print perfect DTG prints on to black or dark garments.
www.printwearandpromotion.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88