The Embroidery Column


Embroidering onto knitwear with confidence


This month Danielle Park and Natalie Greetham at Madeira UK are on hand to provide you with some advice and solutions for embroidering onto knitwear.


A


s we head into winter a large portion of embroidery will be onto knitwear, from beanies to school uniform jumpers and everything in between.


Embroidering onto knitwear can be tricky, from sinking stitches or puckering, to holes forming in your fabric. However, Madeira as always, offers solutions for these potential pitfalls.


● Sinking stitches


Sinking stitches can really compromise the finished look of your embroidery. Combat this by using a water soluble topping which will create a stable surface for embroidery, leaving a crisper finish.


● Digitising


Always tell your digitiser which material you will be embroidering onto, or if digitising yourself, ensure you select the correct fabric setting in your software. It completely changes how the design will be created, underlay stitches and pull compensation need to be adjusted to fully stabilise the design.


Erich Campbell, an award-winning digitiser, says: “Digitising an underlay that stitches the decoration area to the stabiliser, progressing from the centre of the design toward the outside edge, can also help keep things stable.”


● Stitch direction


Another key point to consider is the direction of the vertical grain or rib of knitted fabrics and jerseys. To avoid fabric distortion, you will need to ensure your stitch direction is not also vertical. Using horizontally angled underlay stitching will reduce the fabric stretching and design distorting.


● Puckering


Puckering can occur if your fabric is over stretched when framing or if your design has too many stitches. Hooping the garment with the correct amount of tension, making sure it is taut but not over tight and ensuring there are no more than three layers of stitching will help avoid puckering.


● Holes and ladders


Using incorrect needles or an unnecessarily high stitch count can cause holes and ladders to form around your embroidery. Always ensure you use a ball point needle so that during stitching the needle pushes the fibres of the fabric aside and slips through the structure of the knit, rather than piercing it.


With these simple steps we can all have fantastic embroideries on our knitwear this winter.


| 44 | November 2018


Follow these simple words of wisdom to achieve perfect knitwear embroidery Digitising an underlay that stitches


the decoration area to the stabiliser, progressing from the centre of the design toward the outside edge, can also help keep things stable. – Erich Campbell


www.printwearandpromotion.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92