www.woodturnerscatalog.com
Adjusta-Jaws Designed for holding work for making light
cuts and
sanding, Adjusta-Jaws feature premium rubber grippers that are curved to provide full contact with the workpiece. Includes jaw plates, mounting screws
and 8
premium grippers. # 104-598 8" Jaws
# 104-599 # 104-600
10" Jaws 10" Jaws 14" Jaws 14" Jaws
# 104-601 18" Jaws four-sided ▶ 3-3/8"–10-5/8" ◀
▶ 3-7/8"–14-1/2" ◀ ▶ 3-7/8"–14-7/8" ◀ ▶ 3-7/8"–18-1/2" ◀
▶ 3-3/8"–8-3/8" ◀ ◀ 5-1/2"–10-5/8" ▶ $109.95 $112.95
◀ 5-5/8"–13" ▶
▶ 3-3/8"–10-7/8" ◀ ◀ 5-5/8"–13-1/8" ▶ $112.95 $119.95 $119.95 $141.95
◀ 6"–16-7/8" ▶ ◀ 6"–17-1/8" ▶ ◀ 6"–20-3/4" ▶
Replacement Grippers (set of 8) Size » VM100, VM120/VM150 # 104-602 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.95
Vicmarc Pen Blank Drilling Jaws C
T e most accurate way to drill a pen or project blank is on your lathe. With these jaws, you’ll get an accurate, centered hole every time. Because drilling pressure is easily controlled using the tailstock handwheel, you don’t need to worry about breakout when bit exits the blank.
Note: Drilling on the lathe requires the headstock and tailstock be accurately aligned otherwise an oversize hole
may result. # 105-487 VM100 Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $49.95 VM120/VM150 Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.95
Shark Jaws T ese jaws can be used as traditional dovetail jaws or to clamp down on a tenon. Serrated ridges along the interior and exterior of the jaw provide an aggressive grip.
# 104-607 # 104-606
1-3/8" Jaws 1-3/8" Jaws 1-3/4" Jaws 1-3/4" Jaws
▶ 1-3/8"–2-7/8" ◀ ▶ 1-3/8"–3" ◀
▶ 1-5/8"–3-1/8" ◀
◀ 1-7/8"–3-3/8" ▶ $58.95 ◀ 2-1/8"–3-7/8" ▶ $64.95 ◀ 2-1/8"–3-1/2" ▶ $58.95
▶ 1-7/8"–3-5/8" ◀ ◀ 2-5/8"–4-3/4" ▶ $64.95 Faceplate Rings
# 104-616 2-3/4" Faceplate Ring . . . . . . . . . . . . . . .$21.95 3-3/4" Faceplate Ring . . . . . . . . . . . . . . .$25.95
# 104-617 5" Faceplate Ring . . . . . . . . . . . . . . . . . .$28.95 6-1/2" Faceplate Ring* . . . . . . . . . . . . . .$31.95
*Requires 5" Dovetail jaws for use. Vicmarc Chuck Accessories
T-handle Tightening Keys # 979-212 8 mm (VM100) . . . . . . . . . . . . . . . . . .$10.95 10 mm (VM120, VM150) . . . . . . . . . .$14.95
Jaw Screws (set of 8) # 979-411 For VM100 . . . . . . . . . . . . . . . . . . . . . . .$6.95 For VM120, VM150 . . . . . . . . . . . . . . . .$6.95
ORDER WEEKDAYS
4 PM by # 104-609 # 104-610 A B
A) Extended B) Extended
Extended Dovetail Jaws Although these jaws can be used for traditional chucking using the exterior dovetail, they also off er the benefi t of moving the work away from the headstock
for more working room. Use these jaws in expansion mode for chucking pre-drilled stock such as pepper mills, kaleidoscopes, etc.
▶ 1/4"–1-3/4" ◀ ▶ 1/4"–1-3/8" ◀
◀ 1-3/8"–2-7/8" ▶ $68.95 $94.95
◀ 1-3/8"–2-3/8 ▶
Pin Jaws T ese long, narrow jaws are designed for securing pre-bored blanks like pepper mills and fl ower vases.
# 104-608
1" Jaws 1" Jaws
▶ 1/4"–1-3/4" ◀ ▶ 1/4"–1-3/4" ◀
◀ 1"–2-3/8" ▶ ◀ 7/8"–2-3/8 " ▶
$54.95 $76.95
Long Nose Jaws Designed to get the workpiece away from the headstock, these jaws are capable of holding heavy work and can be used in either an expanding or contracting dovetail mode. T ey are also ideal for gripping round stock.
Long Nose Jaws ▶ 7/8"–1-3/8" ◀ ◀ 1-1/4"–3" ▶ $68.95 Long Nose Jaws ▶ 1-1/8"–2-7/8" ◀ ◀ 1-3/4"–3-5/8" ▶ $94.95 EASTERN TIME WE SHIP IT SAME DAY the GUARANTEED! # 104-605
Step Jaws Step Jaws
Chucks
51
Cup Jaws T ese jaws off er superior gripping power and fl exibility. T ey will do everything standard jaws will do in addition to chucking large diameter tenons, gripping higher up the piece than standard jaws and reaching deep into rough turned bowls for rechucking.
# 104-603 3-1/2" Jaws # 104-604 4-7/8" Jaws
▶ 2-1/2"–3-3/4" ◀ ◀ 3-1/4"–4-1/2" ▶ ▶ 4-3/8"–6-1/8" ◀ ◀ 5-1/8"–6-7/8" ▶
$115.95 $117.95
Step Jaws Step jaws can be used to grip diff erent diameters of stock using the steps inside the jaw or to expand into a dovetail recess using the exterior dovetail.
▶ 1-3/4"–4-3/4" ◀ ◀ 3-7/8"–5-3/8" ▶ $56.95 $66.95
▶ 2"–6-1/8" ◀ ◀ 5"–6-3/4" ▶
P
E
R
D
O
!
D
U
T
V
I
O
E
O
N
N
L
I
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178 |
Page 179 |
Page 180
