24 E B C A B C D
Hollow-Pro Tools by Mike Jackofsky Hollow-Pro tools offer an innovative approach to free-hand hollow turning. At the heart of the Hollow-Pro system is a proprietary swivel cutter positioned at a negative angle. Tis results in less aggressive cutting and improved control. Te optional M4 scraper blade is ideal for making tissue-thin clean up cuts prior to sanding. Hollow-Pro tools and swivel tip cutters are sold separately.
Choosing the right tool Bent tools are designed specifically for use on hollow forms, particularly those with a small opening. Te 1/2" bent tool is recommended for use on pieces up to 8" diameter and for undercutting the first portion of larger hollow forms. Larger diameter work up to 16" requires the 5/8" bent tool.
Straight tools are not only useful for hollowing, they also excel at hogging away wood on open bowls and other forms regardless of grain orientation.
Mike’s favorite Hollow-Pro set up consists of a 1/2" Straight Tool with a standard #1 swivel tip cutter assembly and M4 scraper cutter.
Hollow-Pro™ Tools Shaſt only; requires swivel tip cutter for use. 1/2" tools are 10" long and 5/8" tools are 15" long. Will fit in any handle with a 5/8" hole. torx wrench and 2 tightening screws. See photo above.
Includes
Straight Tools # 103-573 A) 1/2" ........................$119.95 C) 5/8" ........................$139.95
Curved Tools # 100-854 B) 1/2" ........................$132.95 D) 5/8" ........................$149.95
About cutter sizes No. 1 (7/32" dia.) is for use on hard, dense woods and where limited stock removal is desired. No. 2 (5/16" dia.) is for use on soſter materials where rapid stock removal is desired.
RS2000 System by Robert Sorby A favorite among woodturners for over 30 years for freehand hollowing semi-enclosed forms, the RS2000 offers performance
and durability you can count on.
A) Adjustable Side Handle Te Adjustable Side Handle provides additional support and control of the Hooker and Slicer tools. Simply slide the handle onto the tool shank, adjust and tighten in the desired position and you’re
ready to go. 5-1/4" long. # 103-173 ...................... $53.50
B) Armbrace Te Armbrace handle was designed for comfort, control and safety when using Hooker, Slicer and other 3/4" shank tools. Te Armbrace makes it possible to reach further over the tool rest while maintaining safety and
control. # 103-174 ...................... $81.75
No. 1
Swivel Tip Cutter Assemblies Choose from two styles; Negative – non-aggressive, perfect for light finishing cuts and an ideal all around cutter. Standard – provides agresssive cutting action and rapid stock removal (recommended for intermediate to advanced turners). carbide cutter, and torx wrench.
Includes swivel tip cutter holder,
Standard Size » No. 1, No. 2 # 104-709. . . . . . . . . . . . . . . . . . . . . . .$69.95
Negative Size » No. 2 # 979-360 ......................$69.95
Accessories # 102-320 M4 Scraper Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.95 # 101-288 Replacement Cutter No. 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.95 Replacement Cutter No. 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$21.95
# 104-711 E) T25 T-Handle Torx Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.95 # 105-771 T9 Flag Torx Wrench ................................................. .$5.95 # 979-203 Replacement Screw for 1/2" Tool (not for cutter) . . . . . . . . . . . . . . . . . . . . . . . . . . . 95¢ Replacement Screw for 5/8" Tool (not for cutter) . . . . . . . . . . . . . . . . . . . . . . . . . . . 95¢
# 104-710 Replacement Screw for No. 1 Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.75 Replacement Screw for No. 2 Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$6.75
C) Slicer Tool Te hollow ground nose of the tungsten carbide tip allows deep plunge cuts, at any angle, to remove cones from bowls. To sharpen, we recommend using a "credit card" diamond sharpener.
3/4" dia x 15-1/2" long. # 103-178 ...................... $70.95
D
D) The Hooker Tool Tis tool is specifically designed to provide a safe method of reaching into semi-enclosed forms where straight tools can’t reach. We recommend the Hooker Tool be used with the Armbrace Handle which gives you better control of the tool. Te Hooker Tool will accept both the Swivel Tip Holder with Cutter or the Shear Scraper Blade(Midi). Supplied with a shear
scraper blade. 3/4" dia x 16" long. # 103-175 .......................$69.95
Swivel Tip Holder w/ Cutter Designed for use with the Hooker tool, this assembly is used for most of the hollow turning process and
consists of a cutter that rests in a swivel holder which allows you to rotate and adjust the position of the cutter depending on your needs.
3/16" cutter. # 103-179 ...................... $44.50 # 104-745 Replacement Cutter . . . . . $7.25
Shear Scraper Blade (Midi) Tis mounts on the tool in place of the
Swivel Tip Holder and allows you to take fine, ribbon-like cuts when
finishing the piece. # 104-704. . . . . . . . . . . . . . . . . . . . . . .$19.50
Hollow-Pro Rocket Tool Set Hollow-Pro Rocket tools are fast and efficient hollowing tools for making small hollow vessels. Overall size- 3/8" diameter x 8" long. • Straight Tool: Works for most hollow vessels as well as boxes, scoops, etc.
• Bent Tool: Designed for accessing hard to reach areas
• Negative rake cutter for controlled cuts • Round bar stock allows for shear scraping cuts • Fits any handle with 3/8" or 1/2" opening. • Includes one straight tool, one bent tool, two #1 Hunter Carbide Cutters, and Torx wrench
# 104-974. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.95
Tools
Call Toll Free 1-800-551-8876 A
7am–6pm MST Mon–Fri
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178 |
Page 179 |
Page 180
