Safety, Hazard Containment & Sterilising Equipment
Should be Advanced solution for component protection
Acrylic Desiccators from Plas Labs provide a breakthrough solution designed to protect critical materials, research specimens, and sensitive electronic components from contamination. These advanced desiccators offer unparalleled protection, convenience, and visibility, transforming the storage and transportation of valuable assets.
The Acrylic Desiccators are meticulously engineered to create a dust and moisture-free environment, ensuring the integrity and longevity of stored components. By employing a slight positive N2 charge, these units effectively prevent moisture penetration, extending the lifespan of valuable components. The amber-coloured units (CGA) provide exceptional protection against harmful UV rays for light-sensitive materials.
Featuring stackable and non-slip ‘grip tight’ feet, Acrylic Desiccators offer space-saving storage with stability. The standardised construction allows for easy shelf interchangeability, optimising organisation and space utilisation. Perforated slots on each shelf enable optimum gas circulation, ensuring a uniform protective atmosphere within the desiccator.
To enhance structural integrity, desiccators with multiple cubicles have a built-in divider, providing added strength for stored materials. Constructed with optically clear ‘jewelled’ acrylic, these units offer excellent visibility without compromising durability.
Convenience is paramount. Slip-apart hinges and spring-loaded sealing clamps ensure easy and secure access. A built-in hygrometer (Rh) gauge enables precise humidity monitoring for optimal storage conditions. The desiccators also feature ‘door guards’ to prevent warping and internal atmosphere loss.
More information online:
ilmt.co/PL/BBo1 60843pr@reply-direct.com
High-performance composite fume hoods
The SL series fume hoods from Hemco Corporation deliver superior chemical resistance and durability, featuring a seamless, one-piece composite resin construction. This lightweight yet flame-retardant material ensures long-lasting performance without the risk of corrosion. The interior fume chamber is moulded for a smooth, easy-to-clean surface with coved corners and a slotted VaraFlow baffle system for optimised airflow.
Designed for efficiency and convenience, the SL fume hood stands 54 inches tall with an extended front post to support additional service fixtures and electrical outlets. It is available in multiple sizes - 48”, 60”, 72”, and 96” - with a standard 30” depth.
Each unit comes equipped with a vapour-proof LED light fixture, light switch, and a counterbalanced vertical sliding safety glass sash. A variety of accessories, including base cabinets and countertops, are also available to customise the workspace.
More information online:
ilmt.co/PL/x5oM 64298pr@reply-direct.com
Liquid waste autoclave simplifi es biohazard disposal
The workflow process for facilities sterilising large volumes of liquid waste has been significantly simplified. Staff no longer need to manually load containers of liquid waste into autoclaves or chemically treat wastewater with disinfectants before disposal, thanks to the introduction of the AstellBio Liquid Waste Autoclave 200.
Disposing of biologically contaminated liquid waste can be a time-consuming process for those relying on chemical sterilisation. Not only is the sterilisation process itself lengthy, but it also demands extensive staff training to ensure compliance with proper protocols and safety procedures. Regular retraining is required to maintain proficiency and implement new practices effectively.
With the AstellBio Liquid Waste Autoclave 200, facilities can reduce the burden on staff. Named for the number of litres it can sterilise per hour, the Liquid Waste Autoclave 200 handles the entire process automatically. Once connected to sinks, sluices, and other wastewater-producing devices, the system collects, sterilises, and disposes of liquid waste without requiring human interaction. Using the same thermal sterilisation process as a traditional autoclave, it guarantees complete sterilisation of liquid waste.
Moreover, because the Liquid Waste Autoclave 200 relies solely on heat for sterilisation, it eliminates the risk of soil or groundwater contamination.
From pathogens and biohazards associated with Containment Levels 1 to 3 / Bio Safety Levels 1 to 3, to genetically modified organisms, toxins, liquid animal waste, or combinations thereof, the AstellBio Liquid Waste Autoclave 200 is capable of sterilising a diverse range of liquid waste. It does all this within a compact 1.5m² footprint, making it an efficient solution for one or multiple laboratories.
More information online:
ilmt.co/PL/plGA 64094pr@reply-direct.com
What’s in the next issue? Find out with a copy of our Media Information Pack.
2
Contact our sales team for your copy -
sales@intlabmate.com
2
AUGUST / SEPTEMBER 2024 - VOLUME 25 ISSUE 4
50 VERIFIED FUELS MORE DISTANCE COVERED MORE Learn more at
MSASafety.com/FL5000
One small footprint. One giant leap.
Introducing theHorizen 24nitrogen generator for LCMS, combining PEAK performance and economy while helping you reduce your lab’s carbon footprint.
Save space with a 28% smaller footprint* with reduced operating costs, lower heat output and minimal downtime
with up to 55% lower energy consumption** NEW
50
TEMPERATURE CHEST FREEZER LAUDA Mobifreeze
Connecting Science, Bridging
Innovation for over 50 years
1
1
2 9
2 9
7
7
4
4
0
0
5
5
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56
