Pumps, Valves & Liquid Handling


The Art of Pipetting - Top Tips Lee Moir, Mary Lyon Centre, MRC Harwell Institute, training@har.mrc.ac.uk


In wet laboratory research, using pipettes is a daily staple for scientists and researchers. Pipette technique, like most things when you fi rst walk into the laboratory, is passed on from the initial person who shows you the process. The art of pipetting, unlike other technical instruments used in laboratories, does not have quality controls as part of its routine use and usually the only aspect of pipetting which is calibrated is its servicing. Depending on laboratory funding and usage of the pipettes, the frequency and quality of this will vary between laboratories. The variation in technique and servicing can contribute to a lack of reproducibility observed in scientifi c fi ndings and highlights the importance of teaching correct pipette technique in a standardised, practical way, early on in a scientist’s career. It is easy to see how experienced scientists can become offended when pipette training is suggested, but it is the core technique of being in the laboratory and science is about fi nding best practice, optimising techniques and handling equipment in the manner it has been designed to be used. So, these are our hands-on pipetting tips, which are something we discuss (and practise) in our Pipetting Skills course as part of the Laboratory Skills training series, in the Advance Training Centre at MRC Harwell Institute in Oxfordshire.


Ergonomics


Although the health and safety involved with pipetting is often rushed or improperly discussed, it is a vitally important consideration. Dismissal can contribute to chronic pain and poor pipetting performance. By its very nature, pipetting is a repetitive technique which can be performed daily and for long hours, even in this era of automation. Pipetting is a skill that most researchers do without active consideration until they start developing some discomfort. Frequently, the fi rst sign that something is wrong is feeling pain in your thumb, elbow, hand, wrist, neck or shoulders. If ignored it can continue until it becomes more frequent and a repetitive strain injury (RSI) develops. Therefore, when pain develops, do not carry on. Stop and investigate, as your body is trying to tell you something.


Commonly, RSI of these regions of the body is caused by poor posture, repetition and thumb force. Being informed of injuries and risk factors before you begin working in the laboratory and selecting ergonomic pipettes will help to avoid injury. As with all techniques, it is best to instil good working practices early on so that it becomes second nature and minimises the risk of RSI. We undergo H&S assessment for setting up our workstations in the offi ce and working with display screen equipment, so the same care should apply for laboratory training and pipetting. Before beginning to pipette you need to consider the following:


• Aim to ensure that tasks, equipment and environment suit individual needs.


• Ensure recovery time between sessions to prevent arm or hand RSI by taking regular breaks or changing tasks after 30 minutes.


• Hand, wrist or arm injuries can lead to pipetting errors, so use ergonomically designed pipettes to reduce the force applied. Plunger and tip ejection can lead to thumb, fi nger and wrist strains. The force required to perform these actions will depend on the age and make of the pipette so this needs taking into consideration. Do not forget to adjust the volume using two hands, not a thumb twist!


• Consider using multi-channel pipettes to reduce the number of steps required. Additionally, electronic pipettes are a sensible choice for people with existing conditions affecting hand movement or grip as these reduce the steps further.


• Ensure your work area is suitable to maintain good posture whilst working to avoid excessive wrist fl exion or extension, awkward neck positions or slouching forward. Having adjustable worktops and chairs to cater to the individual is the ideal scenario.


Choosing the right pipette for the job


There are many types of pipettes, including manual, electronic, single-channel, multi-channel, repeat dispensers. Choosing the right pipette depends on several factors.


The liquid to be pipetted can have a large bearing on pipette choice and whether to use ‘forward’ or ‘reverse’ pipetting techniques. Larger volumes or aqueous solutions frequently use air displacement pipettes and ‘forward’ pipetting, which involves a blow out in the fi nal step to ensure all liquid has been dispensed. With volatile or highly viscous samples, positive displacement pipettes are considered more suitable. ‘Reverse’ pipetting, where an excess volume is aspirated, the desired volume is dispensed and surplus disposed of is often used for biological, foaming (protein/detergent rich), oily/viscous fl uids and small volumes. Electronic and multi-dispensing pipettes use reverse pipetting routinely. When performed with a manual pipette, it is important to ensure they are calibrated as such. Pipettes are only accurate for forward or reverse pipetting and should be labelled appropriately.


The volume and number of samples will have a large impact on the work. To set up a single 96 well PCR plate can take 576 individual pipetting steps with a manual single channel pipette (6 reagents x 96 wells). Whilst with a manual 8 channel pipette this is reduced to 72 steps or 48 steps with a 12 channel pipette. The reduction in steps dramatically reduces the impact with regards to RSI risks and time, whilst additionally improving the accuracy of pipetting and productivity. Using electronic pipettes can further increase effi ciency.


As is always the case in science, cost will be a factor. Manual pipettes are cheaper and simpler to use than an electronic pipette. The latter can give more reliable results as user inconsistencies are minimised by their motorised piston, they are less reliant on technique and often have multiple functions. These benefi ts can be further incorporated to include electronic multi-channel pipettes. To increase effi ciency and reduce pipetting errors when working between different well formats the use of Adjustable Spacer pipettes are a suitable option to consider.


Factors affecting accuracy and precision


Whilst the pipette is a tool, the way we use it can affect its exactness in measuring liquid samples. ‘Accuracy’ and ‘precision’ are important terms in pipetting. Accuracy describes how close the real volume of the liquid delivered is to the set volume on the pipette. Precision defi nes how similar repeated measurements of the same volume are to each other. Therefore, it is possible to be precise but not accurate, or accurate and not precise, as shown in Figure 1.


Figure 1. Accuracy and precision in pipetting. It is possible to be precise but not accurate, or accurate and not precise.


Some of the factors for poor accuracy and precision are demonstrated in Figure 2, where tip use, uncalibrated pipette use or poor pipetting technique can signifi cantly change the delivered sample volume:


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64