52 Water/Wastewater
CATALOGUE Advert
Water analysis - it’s that simple
VISOCOLOR® SCHOOL reagent case
The VISOCOLOR® SCHOOL reagent case is especially designed for schools and caters to the needs of both students and teachers. To determine the most important water parameters, the case contains 6 colorimetric and titrimetric tests for at least 50 determinations each. All reagents are approved to be used in schools in Germany and can be disposed of easily just down the drain without any harm to the environment.
The newly developed tests are based on our proven VISOCOLOR® system and were developed specifically for schools as high quality VISOCOLOR® SCHOOL tests.
For more information please contact:
MACHEREY-NAGEL GmbH & Co. KG Neumann-Neander Str. 6-8 52355 Düren, Germany Office phone +49 24 21 969-0 Office Fax +49 24 21 969-199 E-Mail:
sales@mn-net.com
www.mn-net.com
New Laser Marked Water Level Indicator
Solinst Canada is pleased to announce the launch of a new version of the Model 101 Water Level Meter. The new Model 101 P7 Water Level Meter features the recently developed Solinst laser marked flat tape and a submersible probe.
The new Solinst flat tape is made of extremely durable PVDF with accurate laser markings every 1/100 ft. or each millimeter, certified traceable to National Standards. The thick dog bone design prevents adherence to wet surfaces. The tape also has increased abrasion resistance, tensile strength, and electrical efficiency with the use of 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. With a few tools, the tape is very easy to splice in the field with a pressure-proof seal.
The P7 Probe is engineered to allow submersion to 1000 ft. (300 m), making it ideal for depth to water, as well as total well depth measurements. The sensor near the tip of the probe provides consistent measurements in wells, boreholes, tanks, and even cascading water with almost zero displacement. The design of the tape seal plug allows the probe to be quickly and easily replaced, if required, keeping downtime in the field to a minimum.
Solinst will continue to offer the Standard 101 P2 Water Level Meter with polyethylene tape and heat embossed markings that groundwater professionals have come to rely on, as well as the narrow coaxial cable Model 102 Water Level
Meters.The new Model 101 P7 Water Level Indicator from Solinst (Canada) features durable PVDF flat tape with laser markings each millimeter or every 1/100 ft., certified traceable to National Standards.
The tape has increased tensile strength, abrasion resistance and electrical efficiency, whilst the P7 Probe is submersible to 300 m (1000 ft.). A Standard Model 101 P2 Water Level Indicator with heat embossed markings is also available.
Reader Reply Card No. 169 Reader Reply Card No.
New pH/ORP Electrode Series with Polycarbonate Body at Pittcon 2012
Pittcon 2012 attendees will want to visit Exhibit Booth 916 to learn more about Sensorex’s (USA) advanced laboratory and process control sensor technology, including the new rugged and cost-effective S150C and S151C- ORP Polycarbonate Body 12mm pH/ORP Electrodes.
Ideal for general purpose lab applications, the new S150C and S151C-ORP 12mm Electrodes can be used with any pH or ORP meter and feature a durable polycarbonate body. User-friendly and maintenance free, they are shipped in a soaker bottle for immediate use with a gel-filled sealed reference. The S150C and S151C-ORP feature a newly designed tip, offering pH bulb and ORP platinum protection while maintaining optimum flow through the body’s slots.
The highly accurate S150C Electrode features a measurement range of 0-14 pH (0-12.3 pH without .Na+ error) with a rapid pH response speed of >90% in 1 second. The S151C-ORP Electrode offers a measurement range of ±1999mV for ORP. The electrode operates up to a maximum temperature of 140°F (60°C) and up to a maximum pressure of 50 psig.
Durable and low-maintenance S150C and S151C-ORP Electrodes offer wetted materials constructed from polycarbonate, silicone, pH glass or platinum. The sensors come with a standard 30-inch cable and BNC connector (US Std. and DIN available at additional cost). Both electrode models are RoHS compliant, built using lead-free glass and lead-free solder. Standard sensor versions are clear polycarbonate, with black body versions available in OEM quantities.
Reader Reply Card No. 170
Robust Test Rod for Electro-acoustic Water Leak Detection Outdoors
The AquaTest T10 from Sewerin (Germany) is an electro acoustic listening stick / test rod with innovative technology and ergonomic design for the location of leaks in water dirtibution networks.
The AquaTest T10 is designed for single handed use with the reciver and microphone combined in one unit. The headphones are activated not by the usual push button but by a new sensor area, simply place your finger in this area and the T10’s headphones are activated take your finger away they are deactivated. The noises that are picked up are visualised on a display incorporated in the handle.
The SDR radio module means the test rod can be used with radio headphones with the result that there are no cables to get in your way.
Reader Reply Card No. Reader Reply Card No. 173 AET Annual Buyers’ Guide 2012
www.envirotech-online.com 174
Upgraded Waterproof Handheld pH Meter
High quality, cost effective pH testing is here. HM Digital (USA) is proud to release its newly upgraded PH-200, a professional grade waterproof (IP67) handheld digital pH meter with a resolution of 0.01 pH and an accuracy of +/-0.02 pH. The completely revamped program now features improved accuracy and stability, onscreen diagnostic messaging, enhanced calibration, temperature calibration and more. Calibration is digital and can be done either with one-touch (automatic) or fine tuning to any point within its range. The meter and its replaceable sensor are backed by a one-year warranty. The PH-200 was co-designed in U.S.A. and Korea and is manufactured in Korea.
HM Digital is a manufacturer of water testing instruments including handheld testers, inline monitors and controllers for pH, TDS, EC, ORP and other parameters. The company ships worldwide from its head sales and marketing office in Los Angeles.
Reader Reply Card No. 171 New Silica Analyser Launched
Swan Analytical (Switzerland) are pleased to announce the release of the newly developed AMI Silica.
The Silica analyser is now fitted with the new Periclip pump and 2 Litre reagent canisters, for the ease of maintenance and uses the well proven continuous flow photometry.
The analyser is intended for Silica measurement mainly in water steam cycles, cooling- and surface water. The AMI Silica offers a meauring range of 1 to 5’000ppb
The analyser can be equipped with an optional 2nd sample stream switching valve or connected to the AMI Sample Sequencer for up to 6 sample streams.
Reader Reply Card No. 172 168
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100
