Flow Level Pressure
Thermal Mass Flow Meter ideal for Serving the Oil & Gas, Wastewater, and Industrial Process Applications.
Fox Thermal Instruments announced today the launch of their new product: the Fox Model FT4A Thermal Mass Flow Meter ideal for serving the Oil & Gas, Wastewater, and Industrial Process applications.
Fox Thermal Instruments has expanded its product line with the addition of the FT4A Thermal Mass Flow Meter. The FT4A is a high-end flow meter, and it features a robust design. Among its advanced features are: 2nd generation non- cantilevered DDC-Sensor™ - Advanced Direct Digitally Controlled sensor technology, Expanded Gas-SelectX® Menus – 3 onboard gas selection menus, CAL-V™ - In Situ Calibration Validation Routine, RS485 Modbus RTU or HART - Optional Communication Protocols, Standard USB Port – Gain Direct Meter-to-PC Connections, FT4A View™ - Software for configuring, graphing, and Logs
The FT4A was designed to be used in Oil & Gas, Industrial, and Wastewater applications. It is ideal for applications monitoring pure gases, mixed gases, and even complex flare gas compositions. Gas-SelectX provides an expanded selection of gases from 3 menus: Pure Gas Menu: 11 common gases available. Mixed Gas Menu: 10 common gases available to mix in 0.1% increments, O&G Gas Menu: C1 – C9+, Nitrogen, and CO2 gases available to mix in 0.1% increments.
FT4A is equipped with the 2nd generation of DDC-Sensor that eliminates the sensor element vibration which can lead to metal fatigue and failure. Its unique design provides a technology platform for calculating accurate gas correlations for the Gas-SelectX feature.
The FT4A’s CAL-V feature allows users to confirm that the meter is functioning properly and accurately -- with just a simple push of a button.
Other FT4A features: One standard 4-20mA output for flow or temperature, A second output selectable for either:, Pulse output (pulses per unit/units per pulse), RS485 Modbus RTU
FT4A View™ software allows easy adjustments to the meter configuration, evaluation of alarm conditions, collection of process data, and measurement viewing from your PC or control station. Moreover, this software can be used to initiate CAL-V -- and it automatically logs the results of each CAL-V test. If any regulatory submission is required, the software will generate a certificate for easy recordkeeping.
A USB connection port comes standard on the new Model FT4A which allows quick and easy access with a laptop. For More Info, email:
43155pr@reply-direct.com
Battery-Powered Dura Mag Flow Meter Simplifies
Flow Measurement No AC Power, No Cables, No Hassle Installation
email: For More Info, email: email:
Designed for ease of irrigation flow measurement, the new Dura Mag™ flow meterfrom McCrometer provides precise, reliable flow data for water management. With a 5 year battery life, Dura Mag eliminates the need for AC power connection, while providing the easiest installation for a flanged mag flow meter.
The Dura Mag flow meter’s intelligent converter with digital display and onboard datalogger is powered by three high capacity D batteries. The batteries are designed for a five-year service life, can be replaced quickly in the field in less than 10 minutes without any special tools and include a comprehensive three-year warranty.
The converter features a spring-loaded canopy lid to protect it from extreme weather and harsh sunlight. The converter’s push-button display and onboard data logger show and record flow rate and totalized flow, with dual alarm alerts for empty pipe and low battery.
Dura Mag builds on McCrometer’s proven electromagnetic sensing technology, which combines intelligent sensor and converter design with advanced materials for accurate measurement, long-life and low maintenance. The meter’s fusion-bonded epoxy coating requires no liner, eliminating the risk of liner separation and water intrusion through the meter body.
Suitable for service in line sizes from 4 to 12 inches, Dura Mag operates over a flow range of 20 to 10,000 gallons per minute. It is accurate to ±1% of flow or ± 0.075% of full scale. Standard installation requires just 2 diameters of straight pipe upstream and 1 diameter downstream.
The Dura Mag Battery Powered Mag Meter is ideal for a wide range of applications, supporting irrigation, well monitoring, water distribution, chemigation (downstream), dairy lagoons, sandy water, surface water, golf courses and more.
For More Info, email: email:
For More Info, email: email:
43507pr@reply-direct.com
For More Info, email: email:
AUGUST / SEPTEMBER •
WWW.PETRO-ONLINE.COM
For More Info, email: email:
ISO 9001:2008 Certified
7152ad@reply-direct.com
47
Ralston Instruments Introduces the DCAP Calibration Test Pump
Ralston Instruments is excited to release the DCAP pneumatic calibration pump. This pump is designed to reach 650 psi / 45 bar quickly with a minimum of effort. With features such as anodized aluminum handles, stainless steel fittings and a precision fine adjust control this pump is one of the best designed and most exciting new products in the test and calibration market. It also has 2 Quick-test ports and options for different pressure gauges connections or kits which include the pump and a FieldLab or digital pressure gauge - all items needed to perform pressure calibration in the field. Best of all it is made in the US by Ralston Instruments.
For more information go to
www.ralstoninst.com/pin For More Info, email:
email: For More Info, email: email:
43499pr@reply-direct.com
Introducing the new DCAP
650 psi pneumatic pump Ralston Instruments is excited to release a new 650 psi / 45 bar pneumatic hand pump that it is exceptionally durable and ready for heavy field use.
• Easily pump up to 650 psi / 45 bar • Anodized aluminum handles are more durable than competitors
• Stainless steel fittings and hose ends make this exceptionally durable
• Soft seat vent valve makes venting pressure very precise
• Unique fine adjust is precise and easy to operate, even at high pressure
• Includes Ralston Quick-test™ hose, process connection and two outlet ports so the user does not need a tee
• Kits available with digital gauge or FieldLab provide everything the user needs to calibrate pressure devices
Visit
ralstoninst.com/pin or scan the QR code to find out more +1-440-564-1430 | (US/CA) 800-347-6575
Made in the U.S.A.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
