MetalMizer MV2018
Versatile Vertical Bandsaw that Stands Out
The Affordable &
• Convenient overhead controls • 45° tilting saw head • 18" x 20" cutting capacity • Made in the U.S.A.
SHOP SOLUTIONS
same tools with current additives we are getting 400 hours or better,” said Skinner. Cuong Nguyen, CNC programmer and setup at Manth
Brownell, said: “Since we switched to Xtreme Cut 764CF, my CNC department has seen many improvements. We have Citizen bar feed machines, and primarily machine 304, 316 and 416 stainless, and 8640 steel alloy. As soon as we started changing over the machines we saw immediate surface fi nish improvements. So far we have a 30% increase in tool life, and the operators really like this oil much better.” “Some of our Citizens utilize high-pressure pumps that deliver the oil at 2500 psi [17 MPa] to the cutting edge, and we struggled to control the foam with the previous cutting oil,” Nguyen said. “Since we changed over to QualiChem’s Xtreme Cut 764CF the foam issues have gone away.” “I saw instant results in the fi nished products,” said Sherman.
Limited Quantity!
Available for Immediate Shipment
“I don’t think there’s any company around that’s doing steel with the fi nishes we’re getting right now with the QualiChem straight oil. Our customers have noticed the difference, too.” Skinner agreed. “We don’t have any fi rm data on the impact of fi nish improvements, but you can see it. Parts look nicer. This helps internal morale, because people feel better about the parts they make. It’s also making a difference in customer satisfaction. We’re getting more re-orders. While it’s impossible to quantify, we can say with confi dence that it’s helping our business.” “The oil can be reused over and over without losing any
properties,” Sherman said. “We will pump out a brass job, fi lter it and put it right back in. We are able to fi lter the oil back to what a brand new oil would be, removing all of the particles but none of the additives.” “The shop is also cleaner and mist-free,” said Sherman.
“We feel the oil hasn’t yet reached its peak with us and we see more opportunities to improve tool life even more.” For more information from QualiChem, go to www.quali-
chem.com, or phone 540-375-6700.
Continued from P45
Software Heads Off Costly Code Rework, Crashes
800.522.5097
metalmizer.com Also depend on the
your high-quality metal sawing needs. METALFLEX
blade to meet C
omputape (Monticello, MN) was founded in 1976 by Ed Popp, an NC Specialist working for General Electric, in a time when most machine tools still had hand cranks
50
AdvancedManufacturing.org | November 2015
© 2015 MetalMizer
™ ™ ™ ™ ™ ™
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178 |
Page 179 |
Page 180 |
Page 181 |
Page 182 |
Page 183 |
Page 184 |
Page 185 |
Page 186 |
Page 187 |
Page 188 |
Page 189 |
Page 190 |
Page 191 |
Page 192 |
Page 193 |
Page 194 |
Page 195 |
Page 196 |
Page 197 |
Page 198 |
Page 199 |
Page 200 |
Page 201 |
Page 202 |
Page 203 |
Page 204 |
Page 205 |
Page 206 |
Page 207 |
Page 208