Performance Machining by
Entirely redesigned frame using both fi nite and static Finite Element Analysis to support extended Y-axis travel.
Substantial table with working surface of 66 x 30 inches.
Larger linear rails. Mounted to a machined shoulder for increased rigidity. Wedge-locked to the frame to reduce vibration.
Doublenut, pre-tensioned Hiwin ballscrews with additional anchor to the Z-axis for increased rigidity.
Coolant ring, washdown, chip conveyor, 40-tool swing-arm ATC, 12,000 rpm spindle, and 115-gallon coolant tank standard.
Brushless Yaskawa Sigma 5 digital AC servos.
Includes AdaptiPath. Used in high-end CAM systems, this new conversational pocketing feature increases metal removal rates, supports rest machining, reduces cycle time, and extends tool life due to controlled engagement cutting.
Includes UltiMotion. Patented motion control technology that simultaneously improves surface fi nish quality and reduces cycle time by up to 30 percent.
Integrated control powered by WinMax includes both conversational programming and industry standard NC, which means you can upload your existing programs and run them with little or no editing.
Learn more at
www.hurco.com/profi tpower
VMX6030i Specifi cations
X, Y, Z Axis Travel Table Size
Max Weight On Table Peak Spindle Motor Max Spindle Speed
Max Spindle Motor Torque Tool Capacity Tool Type
Max Tool Diameter Max Tool Length Max Tool Weight
MaxProgrammable Feedrate Rapid Traverse
Machine Height
Required Floor Space Machine Weight
60 x 30 x 24 inches 66 x 30 inches 3,000 lbs 24 hp
12,000 rpm
175 ft lbs / 237 Nm @ 720 rpm 40
CAT 40
3.2 inches 11.8 inches 15.4 lbs
900 inches/minute
X/Y = 1,181 inches/minute Z = 787 inches/minute
120 inches
226.4 inches x 183.5 inches 21,800 lbs
One Technology Way, Indianapolis, IN 46268 | 800.634.2416 |
www.HURCO.com Machine shown with options. Optimum machine performance is reliant upon installation conditions at the facility,
such as power supply, air supply, and ambient air conditions. Information may change without notice.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148