This page contains a Flash digital edition of a book.
the machine table or at 45° and 90° indexes. Standard 65- mm width reversible jaws allow many clamping possibilities for part sizes 1 to 110 mm in length or width. Optional Raw jaws milled to match part geometry are available. Hirschmann Engineering USA Inc. Ph: 847-468-9700 Web site: www.hirschmannusa.com


Portable CMM


The 77 Series Romer Absolute Arm advanced PCMM achieves nearly a 20% improvement in scanning accuracy and a 15% improvement in touch-probe measurement ac- curacy over the popular 75 Series. It is available in fi ve sizes from 2.5- to 4.5-m measuring volumes. The Romer Absolute Arm is reportedly the only PCMM in the industry that can be switched on and used immediately without warm-up or referencing. Probe


changes can also be made without recalibration to maximize fl exibility on the job. The 77 Series arms are compatible with all Hexagon laser scanners Hexagon Manufacturing Intelligence Ph: 401-886-2112 Web site: hexagonmetrology.us


Miniature Linear Guide with Lifetime Lubrication C-Lube Linear Way ML/MLF is a ball-style, rolling guide for use in linear motion applications requiring smooth travel and maintenance-free operation. The C-Lube lubricating ele- ment features a capillary system consisting of a porous resin sleeve and steel backing, formed by sintering fi ne resin powder and impregnating a large oil supply into its open pores. As the steel balls circulate within the slide unit, lubricant is con-


tinuously distributed to the balls and then the track rail as the bearing travels. The Linear Way ML is also interchangeable. Stainless steel slide units and track rails may be ordered separately and assembled to make a set as required. The ML


comes in track widths of 3, 5, 7, 9, 12, 15, 20, and 25 mm, while the MLF (wide track style) is available in widths of 6, 10, 14, 18, 24, 30, and 42 mm. IKO International Inc. Ph: 800-922-0337 Web site: www.ikont.com


Electrical Discharge Machines For use in industries that need very fi ne surface fi nishing (VD1=0), the QX4C EDM consists of the Machine Tool, the Microfi ne Generator, the Dielectric Filtration System and the CNC Control Unit. In addition, also standard on the machines are a fi re- warning device, pendant control- ler, lamp and fl ushing nozzles. The system was produced with digital sinker EDM process technology to increase machine productivity for both existing and new applications. The new generator works with ma- terials such as titanium-based alloys, ceramic hard metals, and others. This system decreases electrode wear and can be used for high aspect ratio cavities in aero-energy materials and the mold industry. ONA EDM USA Inc. Ph: 586-697-5880


Email: info@onaedmusa.com Web site: www.onaedmusa.com


Simulation Software Deform process simulation software allows users to analyze metal forming and heat-treatment processes using computer simulation. Applications include cold forming, hot forging, rolling, machin- ing, mechani- cal joining and extrusion.


Designers and engineers use the software to predict die fi ll, defects, stress, strain, temperature, forming load, tool stress and other criti- cal process information. These computer simulations reduce the need for costly and time-consuming shop fl oor trials. Scientifi c Forming Technologies Corp. Ph: 614-451-8330 Web site: www.deform.com


April 2016 | AdvancedManufacturing.org 97


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178  |  Page 179  |  Page 180  |  Page 181  |  Page 182  |  Page 183  |  Page 184  |  Page 185  |  Page 186