Automatic & Manual Control of 2 Leisure Batteries
If You use 2 Leisure Batteries, iManager will Improve Their Performance & Save You Money!
From £229.00*
*iManager C8201
Normal ly, we iManager makes it possible to join and control both always advise batteries and even two completely dissimilar batteries: that when two for example, a four-year old 100Ah gel battery and a leisure batteries brand new wet lead-acid battery with 85Ah capacity.
are used in a In addition, whenever iManager detects that the vehicle,
should always be of the same type, Ah capacity and four Amps to the starter battery, helping to avoid age. They should also be close together .
they auxiliary batteries are being charged, it sends up to unpleasant surprises when it’s time to move on.
In some situations, this may simply not be possible or The system constantly monitors the state of charge of economically desirable. For example, in a camper van one or two leisure batteries and ensures that they are where space is limited but the owner wants to have used in the most efficient manner. Although the more 12V energy than a single battery can provide, it iManager operates completely automatically, it is a may not be possible to put two batteries together but simple matter to switch to manual mode if required. there may be space to put one towards the front of the The engine starter battery is also monitored. vehicle and another one towards the rear. This is a far
from ideal situation and most manufacturers wouldn’t An easy to use, full colour LCD touch screen displays even think about doing it.
However, by monitoring each battery separately, the
the condition of the batteries and shows Amps in and out as well as the voltage.
Using the iManager’s control / display panel, you can always being used in the most efficient way. You can switch between batteries manually or let the system also see exactly what condition and state of charge take over, ensuring that your leisure batteries are your batteries are in, including your starter battery.
The iManager consists of two units: the controller In most situations, it’s straightforward to install and,
and the LCD display. Together, they ensure that two when it’s necessary to have two leisure batteries in a leisure batteries of any type, age or Ah capacity are vehicle but they’re in different places, it’s the only way used as efficiently as possible.
to ensure maximum battery efficiency.
Main features of iManager > Automatic or manual management of one or two leisure batteries,
even of different types and Ah capacity. > Dedicated engine battery output. > Displays voltage and level of charge of leisure batteries. > Displays voltage of starter battery. > Automatic or manual battery switch-off (below 11V). > Records information about how and when the
You can order an iManager from any good motorhome dealer or installation specialist.
10
batteries have been charged and discharged. > Battery temperature monitoring. > Two battery banks of up to 600Ah capacity each can be connected.
> Charging current limit is 100 Amps.
To place an order or for more information, visit
www.roadpro.co.uk send an e-mail to
sales@roadpro.co.uk or phone us on 01327 312233
Scan the QR code for more information
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44