1.55 METRE SHOCKWAVE REVENGE DECOMPACTOR
WORKING WIDTH WORKING DEPTH REQUIRED hp
1.55 metres
120 260 mm (full adjustable) 35 50 hp
TOTAL BLADES BLADE THICKNESS WEIGHT
18
12 mm 560 Kg
2.1 METRE SHOCKWAVE REVENGE DECOMPACTOR
2.1 metres
120 260 mm (full adjustable) 45 50 hp
Complete with torque limiter on pto (no shear bolts) and rear mounted smooth roller as standard
24
12 mm 680 Kg
2.2 METRE SHOCKWAVE REVENGE DECOMPACTOR
(fully adjustable by hydraulics) 70 80 hp
2.2 metres 120 400 mm
Plus all gear drive and hydraulic height adjustmant
24
15 mm 1250 Kg
in the close proximity of hot and razor sharp blades when working unsupervised on site. In addition, there is the question of down time to consider when changing several broken shear bolts, which are often rusted and seized-up. To resolve this problem the Imants engineers have opted for the fitting of a torque limiter (similar to a slip clutch) on the pto set at normal shear bolt breaking pressure. When encounter- ing an underground obstruction such as a large rock or brick this device immediately disengages the pto, thus preventing the blades from rotating until the offending obstacle has been passed. This simple expedient now means that the Revenge is fully protected against accidental damage and breakage without the use of a single shear bolt!
This means that the only maintenance now required is regular routine checking of the gearbox oil level, plus an annual gearbox oil change, together with daily common sense checks for bolt tightness and accidental damage when in use.
• NEW MODELS... NEW PRICE... The Shockwave Revenge range now consists of 3 superb models to cater for all users includ- ing - contractors, golf courses, football/rugby clubs, racecourses, equestrian centres and polo clubs. Prices that are approximately 30% less than 2 years ago - means that the Imants range are without doubt the most competitively priced products in their class - on the market.
The new Shockwave Revenge 2.1 metre model • NEW RELIABILITY...
Imants designers were given a brief of “virtu- ally zero maintenance” and were determined to make the Revenge models as reliable and maintenance free as possible for end users. To this end all new models use sealed-for- life ultra heavy-duty bearings throughout.
The new Shockwave Revenge 2.2 metre model
ASK FOR A DEMONSTRATION TODAY CONTACT
For all sales and demonstration enquiries: John Reynolds, imants UK telephone 0121 3553700 mobile 07980 604430
e-mail
johnreynolds@imants.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108