TOOLS & TOOLING FEATURE High precision wireless 3D tool setting probe
Blum-Novotest has tuned into the demands of the marketplace with the introduction of its 3D tool setting probe. The TC64-20 complements its tool setting probe series with a high precision, wireless system that features BRC Radio Technology for tool setting and breakage detection in three axes. The compact tool setting probe is said
to excel through extremely fast and robust data transmission. Instead of the channel hopping method or channel assignment commonly used in the market this probe transmits the collected data to the receiver using Blum's BRC technology. The advantage is that it is based on each single bit of the radio signal running across the entire width of the frequency band, making transmission particularly resistant to interference. The data is then transmitted to the radio receiver RC66 quickly and securely.
CONTROLS UP TO SIX SYSTEMS Just one receiver can be used to control up to six measuring systems from the extensive Blum radio family including all tool setting probes and workpiece touch probes in addition to the newly introduced DIGILOG measuring systems, bore gauge BG60, roughness gauge
system that reduces the high cost of replacement tools, lost production and rejected parts by effectively measuring tool wear in real time, has proven itself in industry. It operates on the principle that the horsepower required to cut a part increases as the condition of the cutting edges of the tool deteriorates. This undoubtedly proved an attractive proposition to visitors at MACH. Blum demonstrated its market leading
TC63-RG or workpiece temperature measuring device TG81 were all shown at MACH along with its solution for the elimination of broken cutting tools and resultant damage or scrapping of components. The Tool Monitor Adaptive Control (TMAC) system protects the CNC machine while providing valuable information regarding the cutting process. Since its introduction the
Blum demonstrated its market leading tool setting system to show how it can work in conjunction with the Blum LaserControl
tool setting system to show how it can work in conjunction with Blum LaserControl. Capable of working on multi-functional mill/turn machine tools, the LaserControl NT-H 3D highlighted its tool setting advantages at the event. The LaserControl NT-H 3D provides non-contact measurement of rotating tools in addition to the mechanical measurement of non-rotating tools in five approach directions. With the increasing use of mill/turn and
multi-axis centres Blum NovoTest has developed the LaserControl NT-H 3D to cater for their demands.
Blum-Novotest T: 01543 257111
www.blum-novotest.com Enter 315
Turn-key Solutions mean clean, safe, profitable working
Welding & cutting Woodworking Metal machining Composite machining
Foundries Automotive Dust & Fume
Nederman’s Project Team Delivers : Pre-studies Planning Design Installation Commissioning Training Maintenance
Extraction & Filtration for : Nederman’s integrated industry solutions
www.nederman.com
Please contact us to arrange a free site survey
www.nederman.co.uk 08452 74 34 34
Enter 9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56