Deburring Grinder Free Chuck Island Ad M.E._Layout 1 9/29/12 11:36 AM Page 1
performance applications requiring the users (race teams) to change the springs for at least every event during a racing season. The same spring subjected to a high-energy mass finishing process will result in the spring lasting easily 5–10
Feature Machines of the Month 6,300 Value Offer Expires 12/30/2012
FREE Magnetic Chuck Up To $
times longer before eventual failure. Even more important is that the pressure the spring exerts on the system is consis- tent, allowing for predictable engine performance over the entire life of the spring. The fact that the spring will last this extended time compared to a “stan- dard” spring results in reduced cylinder head maintenance, no premature fail- ures that catastrophically can ruin the engine, and higher frequency operation (higher RPM equals more horsepower).
Even when manual methods can’t be completely
eliminated, mass-media finish techniques can and
should be used to produce an edge and surface finish
Model CSG1640ASDlll shown with optional paper/coolant system
Model CSG-3A818 shown with optional dresser and coolant/dust system
Purchase Any Precision Clausing Grinder, Manual, Hydraulic or Automatic, 6" x 18" through 20" x 40" and get a FREE Magnetic Chuck, No Cost to You...
Clausing Precision Hydraulic Surface Grinders Feature... • High precision cartridge type spindle is supported by 2 preloaded precision angular contact ball bearings & one NU type roller bearing
• The saddle rests on precision hand-scraped double V ways & the table rests on precision hand-scraped V & flat ways which are coated with ‘TURCITE-B’.
• Guide ways are equipped with auto lubrication to resist wear for lasting accuracy & dampening • Enlarged column & base create high stability & rigidity • Automatic lubrication system is supplied as standard to ensure sufficient lubrication to lead-screws & guideways
• Longitudinal movement is driven by a hydraulic system, cross movement is driven by motor for more accurate increment feeding
Clausing Offers A Full Range of Precision, Low-cost, High Performance Surface Grinders... • Precision Manual Surface Grinders: 6" x 18" and 8" x 18"
• Precision Hydraulic Surface Grinders: 6" x 18" thru 16" x 40"
• Precision ASDlll Automatic Surface Grinders: 8" x 18" thru 20" x 40"
Celebrating A Century in the Machine Tool Business Call 800-323-0972 or visit
uniformity that simply cannot be duplicated with manual or single-point-of-contact methods.
4) Mixed Bag—Compatible Surfaces but Different Function: The “draw and iron” process used to make aluminum beverage cans is complicated, uses very fast production rates and requires tight punch and die tolerances. The punch drives a sheet of aluminum through a progressively smaller and smaller pack of dies to thin the material and form the can in one (1) stroke of the punch at the rate of 400 cans per minute. If the sur- face finish of the punch does not retain lubricant, the newly formed can cannot be “stripped” off the punch, damaging the can. If the finish on the dies is not such that they produce a bright can and do not allow aluminum “pickup,” the cans OD will be unacceptable. Also, due to surface specification, the tolerance between the punch and