Feature Energy management
he NAX-ID inverter chiller, a fully- packaged water chiller has been launched to the UK market by process cooling specialist IsoCool to fulfil the demand for high-efficiency variable speed process chillers. Unlike traditional chillers, where compressors work at either full capac- ity or are switched off in stages, the NAX-ID uses advanced inverter tech- nology to drive the chiller’s screw compressors.
Chiller takes the heat out of energy bills T
This enables the unit to alter the speed of the compressors in direct response to cooling demand, keeping energy consumption to a minimum. What’s more, peaks in electrical usage – which occur upon start-up and shut-down of a compressor – are also limited by the inverter, said to further improving the cost-effectiveness and financial savings provided by the unit. The load matching offered by the NAX-ID, as well the chiller’s ability to achieve precise water temperatures, means it is suitable for factory processes which have variable heat loads. It could also be a suitable invest- ment for a manufacturer planning to
– due to reduced storage requirements for the water circuit –and lower noise levels. Thanks to reduced wear on the compressors, it also offers increased reliability and longevity for the chiller as a whole. Available in three models with cool- ing capacities of 200kW, 300kW and 400kW, and operating in ambient tem- peratures from –10˚C to +40˚C as stan- dard, the NAX-ID is suitable for a wide range of applications.
Fully packaged, it comes complete with fan speed control and electronic expansion valves for increased energy saving. Overall, the carbon emissions and operating costs of the NAX-ID are said to be significantly lower than most comparable traditional chillers. A running costs analysis and esti- mated payback schedule for the NAX- ID can be carried out to clearly demonstrate the chiller’s return on investment.
expand plant operations in the future, since the cooling capacity of the NAX- ID can be ‘ramped up’ as needed. In addition to these benefits, the NAX-ID offers space and water savings
The NAX-ID inverter chiller has been launched in the UK by process cooling specialist IsoCool
IsoCool T: 01376 328455
www.isocool.ltd.uk Enter 340
Enter 4 Factory Equipment JANUARY 2012
Enter 5 7
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48