Feature Health & safety Good vibrations on the shop floor
Vibration in the workplace is a widespread hazard. Two million people in the UK are at risk from the harmful effects of exposure to vibration, yet it can easily be avoided if effectively measured, monitored and controlled
ften taken too lightly by both employers and employees, reg- ular and frequent exposure to vibration can lead to nerve, muscle and joint damage. Vibration is divided into two main types – hand-arm vibration (HAV) and whole-body vibration (WBV). HAV is transmitted via work procedures into workers’ hands and arms and can occur during the use of any handheld vibrating power tools. WBV is trans- mitted through the seat of work vehi- cles or feet of employees who drive or operate heavy mobile machines such as tractors, lorries and forklift trucks. WBV comes from machines or vehi- cles producing elevated vibration levels that shake the entire body.
O Legislation
Employers must, by law, assess and identify measures to eliminate or reduce risks from exposure to vibra-
tion to protect employees’ health. Vibration is covered by the Control of Vibration at Work Regulations 2005, which implement the European Physical Agents (Vibration) Directive 2002/44/EC in the UK.
All new machinery built in or imported into Europe has to comply with the Machinery Directive 2006/42/EC, which tightens up the requirements concerning vibration. Suppliers must provide information on the vibration emission value of their equipment.
Manage and monitor vibration Vibration meters, such as those avail- able from Svantek, are used to measure the amount of vibration from power tools or over the whole body. These meters alert the user to stop the activity when they are approach- ing the maximum levels for exposure. Factors to take into account when
Svantek has a range of sound and vibration analysers and meters to measure hand-arm vibration and whole body vibration
measuring vibration include the length of time the vibrating tool is used (trig- ger time); the identification of opera- tions that make up an exposure pattern; the measurement of vibration for each operation and the typical exposure time for each operation.
What could go wrong?
Not taking action to control vibration can lead to potential prosecutions /claims and lost productivity. For the employee it can result in ill health, pain and distress, limiting of tasks, inability to do fine work, reduced ability to work in cold or damp condi- tions, and reduced grip strength affect- ing the ability to work safely. Employees can also suffer potential musculoskeletal, neurological, and vascular effects on hand/arm such as carpal tunnel syndrome and the risk of permanent damage with sustained usage of vibrating tools.
It is clear that the wise employer will monitor vibration and then manage it, using a well-thought-out plan to control exposure to prevent all these potential unwanted effects. Ensuring that control measures are properly applied is not difficult. Svantek
T: 01296 682686
www.svantek.co.uk Enter 320
Enter 8 Factory Equipment JANUARY 2012 Enter 9 19
Is your business y
carbon approved?
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48