Products Enclosures & air movers Robust enclosures for handheld applications
An extensive range of small and robust enclosures are now provided by CamdenBoss. One example is the 33 series Grip Case which features rubberised corners for protection and additional grip. Available in two sizes – 25 and 35mm high – these have features including screwless assembly via the four soft grip corners, battery compartment lid with retaining screw, optional retaining screws for added security, and recessed lid and base for membrane keypads or overlays. Internal screw pillars in the lid and base facilitate mounting of PCBs while an optional EPDM gasket provides an IP65 seal. The 45 series Palm Cases, meanwhile, are handheld enclosures with integrated battery compartments and rubber boot options, which are available in three sizes from 117.5 x 72.5 x 25.5mm, 139.5 x 82.5 x 26mm and 165 x 82.5 x 26mm. These are moulded in flame retardant ABS and the lid is mounted by four self-tapping screws. Additional features include removable end panels, sliding battery compartment lid options for AA or 9V PP3 batteries, etc. Plain versions without a battery compartment are available to special order.
Also available in the range are keyfob enclosures dedicated to RF activated mobile applications such as handheld transmitters and manual control units; and the 50 series Dura boxes which are aluminium extruded enclosures with plastic end caps for handheld, desk or wall mounted applications. These are suitable for such products as remote controllers, and for housing external hard drives and instrumentation. CamdenBoss
www.camdenboss.com
T: 01638 716101 Enter 210
Die-cast cases
Now available from Eta Enclosures are die-cast aluminium cases in seven sizes from 125 x 80 x 57mm to 260 x 160 x 90mm. Sealed to IP66 as stan- dard, or with IP67 on request, these are capa- ble of meeting the demands of
controls placed in aggressive and hostile environments. The enclo- sures are painted in RAL 7001 as standard, although unpainted versions can be specified. Eta Enclosures T: 01709 386630
www.eta-enclosures.co.uk Enclosures for a variety of uses Rack management system launched
New from HellermannTyton are the XS and XP enclosure ranges. The XS enclosures are available
in mild steel and stainless steel, in wall mounted and floor stand- ing versions, with bespoke models and special sizes avail- able if required. The XS1000 mild steel enclosures are rated at IP66, making them suitable for most applications.
The XP range includes GRP wall mounted units and floor standing enclosures in sizes up to 1500 x 1500mm double door. Plastic junc- tion boxes and noryl din cases complete the range. These can be customised if needed. The XP’s reinforced poly- ester Polyamide 66 thermo- plastic enclosures offer an IP rating of 65, while the wall mounted glass fibre
polyester enclosures are rated IP66 and are particularly suitable for mounting electrical or electronic equipment in aggressive environ- ments, states the company. All non-metallic enclosures are manufactured from self- extinguishing material and can operate in temperature ranges between -20˚C and 120˚C. HellermannTyton T: 01922 458151
Enter 212
www.hellermanntyton.co.uk
Hybrid fans suit rail industry applications Said to be one of the most powerful Ø200 axial fans ever produced, Ecofit-Etri's 200DW hybrid fan combines the high airflow development of an axial fan with the maximum pressure of a centrifugal fan. This is achieved by a diagonal flow impeller design and a cone-shape motor unit combined with a maximum rotational speed of over 5000rpm. The result is a 930Pa maximum pressure and 970m³/h maximum airflow. Available in the UK from Axair Fans, this has been developed for the railway industry and is available in 28Vdc or 110Vdc. Axair Fans
www.axair-fans.co.uk Enter 214
standard and factory modified enclosures plastic, die-cast and extruded
printed standardndard
01256 812812
sales@hammondmfg.eu www.hammondmfg.com
Enter 14 machined drilled drilled
EMKA's new RMS490 Rack Management System is provided in a standard 1U 19” format and is designed to fulfil all the needs of power and environmental man- agement in high density cabinets. This has eight inputs for
electromechanical locking systems and door contacts; and opening a lock is via keypad and pin code, transponder cards, mobile phones and via network and SNMP commands. Four sensors can be connected to monitor ambient con- ditions and issue alarms via four relay contacts, while two continu- ous control outputs are available for temperature regulation. EMKA
T: 024 7661 6505
www.emka.co.uk Enter 213
Enter 211
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96