26
products heating, ventilation & damp proofing KE224
Ideal Commercial heat pump helps decarbonise Grade I listed building at Ely Cathedral An ECOMOD natural refrigerant air source heat pump from Ideal Commercial Heating has been installed at The Almonry Kitchen, a Grade I listed café and event space within the grounds of Ely Cathedral, helping to reduce carbon emissions while preserving the character and heritage of one of the UK’s most historically significant buildings. The project centred on the installation of the ECOMOD 290HT 27kW monobloc air source heat pump,
which now provides both heating and domestic hot water for the building. The ECOMOD 290HT was selected for its ability to deliver high flow temperatures of up to 75°C, making it particularly suitable for retrofit applications where existing heat emitters and pipework are being retained. The ECOMOD 290HT was selected for its ability to deliver high flow temperatures of up to 75°C, making
it particularly suitable for retrofit applications where existing heat emitters and pipework are being retained. This capability enabled the project team to introduce low carbon heating technology without compromising the building’s operational requirements or undertaking extensive alterations to the Grade I listed property.
Ideal Commercial Heating enters commercial hot water market with EQMAX launch Ideal Commercial Heating has expanded its product portfolio with the launch of the EQMAX range of gas- fired condensing water heaters, marking the company’s first move into commercial domestic hot water products. Available from September 2026, EQMAX will enable contractors to source commercial heating and hot water equipment from a single market-leading and trusted manufacturer. This will make it simpler to order a more complete commercial plant room solution, supported by the company’s nationwide sales, technical and aftersales services. Designed for commercial buildings with hot water requirements, the EQMAX water heater range comprises ten
models offering outputs from 20-120kW and storage capacities of 210, 356 and 538L. This broad selection allows the output and stored-water volume to be closely matched to the requirements of each application. EQMAX is suitable for both planned refurbishment projects and urgent replacement installations, where restoring
the hot water supply quickly is a priority. Its familiar look and configuration, commonly used hydraulic connection sizes and straightforward controls make installation straightforward. As with Ideal Commercial Heating condensing boilers and heat pumps, EQMAX comes with a five year warranty at no extra cost when the appliance is commissioned free by Ideal within three months of the installation date.
https://idealcommercialboilers.com/hot-water KE227
engineered specifically with this transition in mind, offering full compatibility with low water temperature heat pump systems as well as condensing boilers and waste heat recovery installations. The CurveVector is available with a
SPC launches CurveVector cassette heater, bringing 360° ceiling-mounted warmth to schools, offices and public buildings
SPC, the Leicester-based heating solutions manufacturer, has announced the launch of the CurveVector cassette heater, a ceiling- mounted unit designed to deliver powerful, even heat distribution while keeping floors and walls completely clear. Built around an innovative circular
discharge grille, the CurveVector directs warm air evenly across 360°, eliminating the cold spots that can affect conventional wall-mounted or perimeter heating systems.
The unit fits discreetly into standard 600 x 600mm suspended ceiling grids, or can be integrated into open ceiling designs, leaving only the circular grille visible from room level. The launch comes at a time when
specifiers across the education, healthcare and public sectors are under increasing pressure to move away from fossil-fuel heating while maintaining comfort standards. The CurveVector has been
choice of two- or three-row heating coils and delivers a heat output of 6.3–8.4kW at standard 82/71°C water temperatures, 4.2–5.9kW at 60/40°C for condensing boiler systems, and 2.9–4.1kW at 45/35°C for low- temperature heat pump installations. An energy-efficient EC fan motor keeps running costs down and noise levels as low as 29 NR, making the unit suitable for noise- sensitive spaces. Installation has also been simplified.
A smart suspension system with adjustable brackets allows the unit to be fitted before or after the ceiling grid is in place, while side-mounted 22mm copper pipe connections and a rotatable grille make on- site alignment straightforward. SPC has positioned the CurveVector for
any space where clear walls and floors are a priority and consistent, draught-free heat is essential. Full technical specifications, performance
data and installation guidance are available via
https://spc-hvac.co.uk
ENQUIRIES VISIT
www.abcd-info.co.uk EMAIL
korucirculation@c-cms.comm POST use address card KE226
https://idealcommercialboilers.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
