PHAM NEWS | DECEMBER/JANUARY 2025 Water Heating& Cylinders


Flexible air source heat pump option


Available in left or right-handed versions, the Juniper HP Plus from Modutherm integrates an air source heat pump with a stainless steel cylinder for effi cient hot water production. The product is said to represent an ideal solution for electric-only residential or light commercial projects. For larger properties, or where there’s a need for additional domestic hot water, multiple Juniper HP Plus water heaters can be installed in parallel. The fl oor-standing unit uses R290 refrigerant and is


available in 200- and 300-litre capacities with handed front/side-mounted water connections to facilitate straightforward integration with pipework affi xed to an adjacent wall, ensuring symmetry in pipework. Under standard test conditions, the water heater can


achieve a CoP of up to 3.80, while advanced software means that it will automatically calculate and analyse its current operating conditions and then adjust the power input to achieve an optimal CoP. Paul Longman, national specifi cations manager


at Modutherm, comments: “As developers and housebuilders integrate renewables into their apartment and multi-dwelling projects, they’re looking for exceptional value for money – and the Juniper HP Plus delivers just that. It’s the perfect choice for residential and light commercial applications, as well as being simple to install and operate.” ◼ phamnews.co.uk/125/18


Mini store provides citing fl exibility


Bespoke hot water cylinder specialist, Newark Cylinders, is promoting the Heat Geek Mini Store – a range of compact, space saving units designed by the heating experts at Heat Geek. Operating with fl ow temperatures as low as 40°C and boasting fast recharge times, the Mini Stores off er heat pump users a viable hot water storage solution when there is no room for a standard cylinder. They are small enough to fi t into almost any


property and can even be laid horizontally, and/ or wall-mounted. They are also reversible, in that they can be installed upside-down, in case swapping the positions of the coil connections with the heat source fl ow and return connections proves to make piping them up easier. The Heat Geek Mini Store can also be used with


gas boilers to improve their effi ciency and provide much higher fl ow rates than a standard combi boiler, allowing up to three showers to be run simultaneously. ◼ phamnews.co.uk/125/19


Instant hot water dispenser with built-in fi lter


Designed for use in high demand commercial applications, the Heatrae Sadia Supreme Evo from Baxi is said to be the company’s most energy-effi cient instant hot water dispenser. Building on the tried- and-tested technology of the Heatrae Sadia Supreme, the new premium model is the fi rst instant hot water dispenser to benefi t from Heatrae Sadia’s space-saving fi lter- inside design, a one-touch digital dial and a new ‘learning’ thermostat. Equipped with smart Intelliboil Plus


technology to monitor usage patterns, the Supreme Evo also off ers eff ective energy management for building operators. This feature ensures the water is brought on to boil to match user demand while reducing the temperature by 10°C after an hour of


inactivity. Alternatively, heating times can be preselected using an in-built seven-day programmer. ◼ phamnews.co.uk/125/20


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44