DS-APR22-PG40_Layout 1 14/04/2022 10:27 Page 1


FEATURE MECHANICAL COMPONENTS


How beAring design cAn result in energy efficiency


It is estimated that a 10% reduction of friction in all large bearings in use would provide an energy saving equal to


the output of 18 large power stations. Here Chris Johnson, managing director at miniature bearings supplier SMB


Bearings, explores the bearing design possibilities that will offer increased efficiency in industrial applications


N


ew materials, lubrication techniques and advanced geometry designs are enabling manufacturers to create bearings that are more energy efficient.


However, energy losses in bearings are not considered the primary focus of plant optimisation efforts because they are already considered a high efficiency component. On the other hand, some argue that bearings are so ubiquitous – with a huge number of installed bearings in industry – that this overall energy consumption and potential energy savings should not be ignored. So, let’s take a closer look at three bearing design considerations to decrease friction and increase efficiency.


AdvAnced mAteriAls Energy-efficient bearing designs focus primarily on reducing the contact between the rolling elements and the raceways or the cage. By reducing the roughness of the contacting elements, friction will be reduced. Furthermore, the osculation of the bearing at both the inner and the outer rings significantly affects the friction by reducing the contact area and thus the microsliding of the contact. According to a 2021 study, friction-optimised


designs can have a significant impact on the reduction of the global energy losses of bearings. Based on the design of one bearing manufacturer, a preliminary estimation of this reduction is about 0.15 – 0.20% of global energy consumption. Traditionally, steel has been the material of choice


in bearing design, but polymer-based materials, such as PTFE and nylon, offer many benefits when used in less demanding environments. These benefits include corrosion resistance, reduced need for lubrication and a reduced weight.


geometry


Geometry considerations such as special cage designs and the number of balls in a bearing influences the amount of friction generated, as this determines the number of frictional contacts during operation. The geometry, as well as the process by which the retainer is manufactured, have an influence on the friction generated. For example, opting for a 3D printed retainer in nylon (PA66) or another polymer material can help to


reduce the weight of the whole bearing. In some cases, ceramics offer a feasible alternative to


metal. They have properties that offer similar benefits to metal, but they’re also much lighter. Carbon-fibre reinforced nylon is one of the most popular


combinations for nylon-printed materials. It offers many of the same benefits as standard nylon – including high strength and stiffness – but it produces significantly lighter components. Surface coatings can have a significant effect on bearing friction reduction. Coatings such as molybdenum disulphide and tungsten disulphide increase wear resistance, fatigue durability, and reduce friction during bearing motion.


reducing friction


A proper lubricant will reduce friction between the internal sliding surfaces of the bearing’s components and reduce or prevent metal-to-metal contact of the rolling elements within their raceways. While this is a good way of reducing wear and preventing corrosion, there are new materials that, when used on bearings, dramatically reduce friction compared to the lubrication and surface treatment options that are currently on the market. For example, the process of adding a graphene coating


to bearings would be relatively simple and similar to adding a traditional lubricant. When graphene becomes readily available, we will examine this form of lubrication more closely. As well as not being harmful to the environment, graphene flakes added to the surface of a bearing can last a considerable amount of time, due to the ability of the flakes to reorient themselves during the initial wear cycles, providing a very low coefficient of friction (COF). In a study on the potential of graphene as a new emerging


lubricant, researchers estimated that the reduced loss of energy to friction offered by new materials would yield potential energy savings of 2.46 billion kilowatt-hours per year, equivalent to 1.5 million barrels of oil. By optimising each element of a bearing’s design to


consider friction, it is possible to reduce bearing friction. By multiplying this saving for each bearing in a machine, plant or industry, significant energy savings can be realised.


SMB Bearings T: 01993 842555 www.smbbearings.com


4 DESIGN SOLUTIONS APRIL 2022 0


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58