| 45
Above left: Safety and driver ergonomics are key for operators Above right: Large, heavy timber loads can make visibility challenging
ALTERNATIVE POWER
The timber industry is looking to alternative power options and how these could benefit its materials handling operations. Even applications that in the past have always used an internal combustion (IC) engine forklift are enquiring about lift trucks powered by lead acid or lithium-ion batteries, as well as hydrogen fuel cell technologies if there is sufficient infrastructure.
Electric lift trucks no longer have the reputation of only being suitable for indoor operations, and often are plenty tough enough for wood applications, from sawmills, to those creating board and building materials, through to operations handling wooden furniture. And with the right battery management, lift trucks can offer increased run times.
THE GREEN AGENDA A ‘green’ approach is key for many materials handling fleets. Choosing zero-emissions electric lift trucks is common in applications that are aiming to meet emissions targets, whether for corporate or legislative reasons. There is often a cost benefit too. It is fairly common for timber processing and manufacturing operations to be located near to, or to have on site, biomass power stations. This provides a rich source of energy, which can provide these applications with a cheaper power source that enables them to charge lithium-ion lift trucks at their site with optimal cost efficiency.
In these cases, being able to use this source of power to charge electric lift truck batteries provides a highly sustainable and environmentally friendly solution and encourages these applications to increasingly
embrace and integrate electric equipment solutions, all while reducing their overall TCO.
EMBRACING TECHNOLOGY The timber sector is increasingly embracing new technologies, driven by a need to maximise productivity and streamline processes and sites. In some markets, incentives and schemes are driving digital adoption. This is an opportunity for businesses in the wood industry to explore automated materials handling equipment solutions. Meanwhile, the warehousing sector is increasingly automating repetitive processes to increase efficiency. Eliminating the human factor from materials handling equipment may result in time and cost savings in the right setting. Workers previously carrying out recurring actions on a lift truck can be freed up to put their skills to use in more added value processes. Incidences of product and equipment damage may also be decreased with automation. Automation also provides a practical solution to labour shortages. A smaller pool of candidates and a high turnover can also leave timber businesses with a less experienced workforce, which in turn can lead to lower productivity levels or more damage to the product or facility. Technologies such as lift truck object detection, pedestrian detection, awareness lights, load overload indicators and telematics all play an important role in these scenarios. More and more IT is moving into the forklift operator’s cab.
CONSTANTLY TOUGH CONDITIONS Wood handling operations are typically rugged, dirty and tough environments.
Extreme cold or heat can push materials handling equipment to its limits, and trucks (and their operators) must contend with rough, uneven surfaces. Large, heavy timber loads also make visibility challenging, particularly for tall loads that are often 4m wide in front of the operator.
Having experienced a difficult few years economically, companies may also be forced to use an ageing fleet, leading to expensive repairs and costly downtime, which impacts productivity. One solution to this particular challenge is having local support for lift truck parts and maintenance. Fleet management systems can also help manage maintenance to extend equipment life and minimise downtime.
Considering the toughness of wood applications, it is no surprise that the operators themselves are typically influential in decision making around materials handling equipment. Safety and driver ergonomics are key for operators, who will benefit from lift trucks that offer ergonomic and technologically advanced features, with superior operator comfort, precise handling, and easy entry/exit to the cab. However, to reduce overall costs, applications should always seek lift trucks that are designed for maximum reliability, with robust powertrain, strong axles and mast, and durable components throughout. Attachments that enable equipment to be dual function for versatility, performance and fleet efficiency will also help optimise operations. Optimising fleets with tough materials handling equipment and assistive technologies is a good way for wood applications to be prepared as the sector recovers. ■
www.ttjonline.com | November/December 2021 | TTJ
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93
