Vol. 64, No. 4 winter 2019 294


168. Trial fi t prior to rigging.


(Figure 163) T e yard bands are brass tube; the sling band is 1/8-inch, then 3/32-inch, and fi nally 1/16- inch tube at the ends. Each band was drilled for eye-pins that will hold the blocks and braces. T e batten was carved from 1/16-inch thick wood strip. T e completed yard was painted fl at white, then the blocks added. (Figure 164)


T e mast was built up the same way but used larger 1/8-inch square strips. I used a 1/4-inch diameter tube as a sleeve to maintain a consistent 12-inch scale diameter as the mast was rounded. (Figure 165) T e mast was cut to 48 scale feet in length and returned to the lathe for tapering to a scale 6-inch diameter at the truck, aſt er which the locations of


169. Wire pins used to obtain consistent lengths of rigging between insulators.


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100