Vol. 64, No. 4 winter 2019 342
30. 28.
focused on some extra detailing. Using metal rod, styrene, and copper wire I scratch-built the boat booms and kingposts that are visible in many archival photographs of the ship. (Figure 37) In addition, I created realistic rope reels by wrapping copper wire around a styrene axle, painting it, cutting it into segments and gluing them between photo-etched reel supports. Figure 38 shows the wrapping process, a completed assembly, and, in the background, a plastic kit part, for comparison.
29.
The fi nal important subassembly I had to address was the unusual quadrupedal (four-footed) ensign staff mounted on the fantail. I discarded the kit’s oversized plastic fl agpole and went to work building a quadruped. The fi rst thing I did was to make a more realistic and scale-correct fl ag than the kit’s decal would provide. I purchased a linen Model Shipways fl ag, soaked it in water, and curled it with metal
31.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100