Powtech World Magazine Advertorial
Protection by Deflagration Venting establishes requirements for the design, location, installation, maintenance, and use of devices and systems that vent the combustion gases and pressures resulting from a deflagration within an enclosure so that structural and mechanical damage is minimized. EN Standards EN14491 and EN14797 provide similar
direction to the user of explosion vents, while the NFPA Standard provides useful direction with respect to periodic inspection.
COMPOSITE VENTS
The composite vent design was introduced by BS&B Safety Systems more than 50 years ago and marked a milestone in the achievement of low-set pressure from relatively thick sheet metal. In the three-part sandwich construction, the outlet section controls the opening pressure, while the inlet section protects the fragile plastic film and provides a predetermined degree of vacuum resistance. Composite vents can be either flat or domed, with domed vents being recommended for vacuum service, particularly cyclic vacuum service. Single Section Vents: As the demand for explosion
protection technology grew, BS&B later developed the single section vent. In this design, a single sheet of metal is intermittently cut about its perimeter and gaskets are applied to cover the cut pattern. Eliminating the fragile
plastic film seal and one sheet of metal reduces the mass of an explosion vent, making it more efficient at responding to the rapid rate of pressure arising. By engineering the single section vent with a domed shape, the design allows the explosion vent to handle even high vacuum operating conditions and cyclical operating pressure conditions. It also eliminates product build-up, enabling use in clean service applications. Single Section Compound Domes: In 2010, BS&B
improved on the single section vent design by altering the shape of the dome to a unique compound geometry. This advance was born out of a desire to increase the vacuum resistance of the vents, without increasing the weight. The purpose of a domed construction is to provide greater intrinsic vacuum resistance. This is important, as powder and bulk solid storage, pneumatic conveying and dust collection systems often operate under cyclic vacuum conditions. Applications for Composite Vents: While single section explosion vents offer the best solution for most applications, there are some exceptions where composite vent technology provides the best performance. In particular, this is for applications that utilize combustion systems with hot exhaust gases.
The BS&B patented HTV vent has internal thermal insulation that allows for service conditions in excess of 1000 degrees Fahrenheit / 540 degrees Centigrade.
COMPANY INFORMATION
BS&B Safety Systems manufacture a broad range of dust explosion prevention and protection technologies. Manufacturing facilities operate and test according to national and international standards and codes, including NFPA 68, NFPA 69, EN 14491 and EN 14797.
bsbsystems.com
sales@bsbsystems.com
sales@bsbipd.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125
