42
Safety New Gas Detection Device for Remote Monitoring of Toxic Gases and Oxygen
Honeywell Analytics (UK) recently announced the launch of Sensepoint XCD RTD (Remote Toxic Detector); a device that can help businesses reduce the ongoing cost of gas detection whilst increasing on-site safety. Sensepoint XCD RTD is able to do this by providing a common transmitter platform that supports a wide range of toxic gas hazards and Oxygen; this means that common tools and common mounting arrangements can be used on-site, helping to reduce the cost of installation and training required.
The device also helps to keep sites safe by providing enhanced, easily accessible visual cues;
Searchpoint XCD RTD’s unique, fully illuminated tri-colour LCD shows the status at a glance – even from a distance. This benefits the user by making devices requiring attention easier to find on-site. Sensepoint XCD RTD is designed to offer excellent flexibility of use and is an ideal solution for hard-to-reach locations or areas where the transmitter needs to be separate from the sensor. With remote sensor mounting of up to 30 metres / 100 feet away from the transmitter, Sensepoint XCD RTD provides a robust monitoring solution even in challenging environments where detection is difficult.
Sensepoint XCD RTD helps keep sites safe with enhanced, easily accessible visual cues. The device’s unique, fully illuminated tri-colour LCD shows the transmitter’s status – normal, warning/fault or alarm – at a glance, even from a distance. A steady green backlight indicates normal operation, flashing yellow indicates warning/fault and flashing red indicates an alarm. This benefits the user by making devices requiring attention easier to find on-site. This detector simplifies set up and configuration with its LCD and non-intrusive magnetic switches, which helps reduce the ongoing cost of gas detection.
Sensepoint also minimises false alarms through an auto-inhibit of outputs when the device is being adjusted, preventing unnecessary false alarms at the control panel. This enables an engineer to make changes to the device in the field without requiring a second operator at the control panel to manually inhibit the device.
This detector Monitors a wide range of toxic gases including Hydrogen Sulphide (H2S), Carbon Monoxide (CO), Ammonia (NH3),
Chlorine (Cl2), Oxygen (O2), Hydrogen (H2), Sulphur Dioxide (SO2), Nitric Oxide (NO) and Nitrogen Dioxide (NO2). Sensepoint XCD RTD is certified for use in hazardous areas by ATEX (European) and IECEx (International). Other Asian approvals are also available.
Reader Reply Card No New Rugged and Reliable Four-Gas Detector
BW Technologies by Honeywell introduces the newest member of the GasAlert family - the GasAlertQuattro. Rugged and reliable, the GasAlertQuattro four-gas detector combines a comprehensive range of features with simple one-button operation. Simultaneously
monitor and display H2S, CO, O2 and combustibles. With flexible power options, AA batteries or a rechargeable battery pack, the GasAlertQuattro is always ready for your shift. The large LCD with intuitive icons and backlight simplifies on-site auditing and compliance. Bump test and calibration icons are clearly identifiable, and extralarge digits are easy to read in varying light conditions. The green LED confidence flash provides continuous visual confirmation of detector operation and compliance. The versatile GasAlertQuattro was designed for harsh environments. A durable exterior with reinforced bumpers and integral concussion-proof boot protect the detector. Suited to a wide range of industrial applications including general confined space entry, the GasAlertQuattro offers a simple, automatic calibration procedure and is compatible with BW’s MicroDock II automatic test and calibration system. With the GasAlertQuattro, seeing is believing.
Reader Reply Card No Improvements for Photo-Ionisation Gas Detector Reader Reply Card No 119
Toxic and Combustible Gas Monitors Fixed Systems & Portables
Sensor/Transmitters 24 Vdc Powered, 4-20 mA Output
Portable Multi-Gas Detector
Detcon (USA) has improved its Model PI-700 Photo-ionisation gas detection sensor to better manage humidity drift and surface contamination, making it more reliable and durable in the field. The Model PI-700 is a "Smart" sensor designed to detect and monitor a wide range of volatile organic compounds (VOC's) and toxic gases in air. Photo-ionisation detectors (PID's) are generally the preferred sensor technology for detecting VOCs; however, high humidity can cause the zero baseline to drift. In addition, large complex VOC molecules can build up on the sensor lamp filter causing surface contamination and span drift. In response, Detcon designed a secondary filter that helps minimise humidity changes and prevents heavy complex airborne VOC molecules from contacting the PID Sensor. Proper use of the secondary filter can extend the time between required sensor cleanings and/or replacement. The sensor assem bly includes a plug-in replaceable miniature PID in an electro-polished 316 stainless steel vault, a fully encapsulated Intelligent Transmitter Module (ITM), and a sensor splashguard with integral calibration-port. Detcon's Model PI-700 sensors are CSA-US and ATEX certified for installation and use in Division 1/Zone 1 industrial locations
Reader Reply Card No 120 Portable Multi-Gas Detector with Catalytic Sensor PGD3-IR
EX-5175 (Oxygen and Toxic Gases such as H2S and others)
EX-5155 (ppm Solvents) EX-5100 (Combustible Gases) EX-5165 (ppm & % CO2) EX-5185 (ppm Hydrocarbons)
FEATURES Infrared LEL & CO2 Sensors CE/ATEX Approved Data Logging Option Internal Pump Available
Available for CO2, LEL, O2, CO, H2S, NO, NO2, NH3, SO2, Cl2 and HCl.
P.O. Box 979, Ann Arbor, MI. 48106-0979 Phone: 734-761-1270 FAX: 734-761-3220
www.enmet.com
info@enmet.com Reader Reply Card No Reader Reply Card No Annual Buyers’ Guide 2011 121 122
The model PGD2 portable multi-gas detector from Enmet (USA) incorporates a catalytic type sensor for 0-100% LEL methane, and is preprogrammed for more than 12 other combustible gases and vapors. In addition, the PGD2 can also be supplied with an oxygen sensor and up to two electrochemical sensors for various
toxic gases, such as, CO, H2S, NO2, SO2, etc. The instrument has audio/visual alarms and complete data logging capability. The PGD2 can monitor gases by diffusion, or sample draw when utilising the available option of an internal pump. Other features include a rugged enclosure with protective rubber boot for high impact resistance, and IP66 ingress protection rating. The PGD2 is ATEX certified and CE approved.
118 117
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108
