21 Increased Operations to the Far East
Loba Chemie Pvt Ltd has increased its market operations to the Far East area. The company has identified the market as an untapped potential area to push its products. Loba Chemie is based in Mumbai, India and has been servicing this industry for more than 45 years with over 4000 products.
Loba has managed to identify its partners in the above areas and has created more than 10 stock holding points which will be able to service the market with immediate and complete supplies of its product range of chemicals and glassware. Loba will also look into establishing a manufacturing and warehousing facility in Thailand in the months to come. They will be looking to acquire a local company, which will be able to provide them with their experience of production, warehousing and logistics. This will allow reduction in some of the shipping cost and also service other areas such as Australia and New Zealand directly from Thailand.
The company will establish a local office with independent control for the Far East customers by the end of 2011.
New products include standard solutions, AAS and ICP Standards, range of high purity solvents, pesticide residue analysis, environmental, LC-MS, and peptide synthesis grade. The company will offer the same for OEM in the beginning of 2012.
Circle no. 378 New Semi-Automatic Intestinal Parasite Analyser
The new parasite analyser from DiaSys Ltd significantly increases the throughput of a laboratory as continually preparing each specimen manually is currently a very laborious process. This analyser optimises human resources and saves money on slides, coverslips and pipettes.
This innovative analyser provides 4x the sensitivity than the manual technique and in a fraction of the time it takes to conduct a microscopic examination. It standardises laboratory protocol and improves morphology as our new flow cell provides a 3D view of the organisms without the distortion, which is usually created by the pressure of a coverslip.
Health and safety benefits also apply because lab staff do not come into contact with hazardous samples or reagents.
Circle no. 379 CUTTING MILLS
Dishwasher Metal Thermometer Control Company’s new Traceable®
SM 100, SM 200 and SM 300 Dishwasher Metal Thermometer reports the maximum and minimum temperatures achieved
during the dishwashing cycle. It insures proper cleaning by providing proof of meeting the temperature regulation of achieving 180°F (82°C) during dishwashing. Waterproof and metal construction are ideal for applications in wet labs, wash-down areas, and outdoors. Use it in food, pharmaceutical, clean rooms, and industrial labs.
Features include °F/°C switch, minimum and maximum memory readings over any time period, and a HOLD switch (freezes the display to capture a temperature). Range is –58 to 302°F and –50 to 150°C, resolution 0.1°, and accuracy ±1°C between –20 to 150°C.
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
The large, bright 3/8-inch-high LCD (liquid crystal display) is easy to read. It is supplied with a clip for attaching to a dishwasher, silver- oxide battery, and a Traceable®
Certificate. The size is 1-3/4-inch diameter by ¾-inch and the weight is 1 ounce. Circle no. 380
Membrane Dryers set Highest Standards for Compressed Air Systems
The new range of Hi-DRI compressed air membrane dryers from Hi-line Industries have been re-engineered to be technologically superior products, achieving new standards for reliability, performance and energy efficiency. They feature a patented arrangement of structurally packed, permeable hollow fibres spirally wound on a support core. This creates an optimised design combining efficient air flow with high contact areas to maximise the drying performance within a compact unit size. These products are ideal for in-line installation to ensure the delivery of dry compressed air at the point of use. This ensures maximum effectiveness with virtually any dewpoint or degree of drying being achievable.
As the humid compressed air passes through the Hi-DRI unit, water vapour diffuses through the walls of the hollow membrane fibres without loss of compressed air. At the dryer outlet, a small volume of the now dry air is expanded and released into the annular space between the membrane fibres and the outer aluminium shell. This air purge then sweeps away entrained water vapour to atmosphere as a humid air stream.
The Hi-DRI air dryer makes it easier and less expensive to supply pneumatic equipment and instrumentation with clean, dry compressed air. This simple, proven technology helps eliminate condensation, oxidation and microbial growth, resulting in reliable and predictable performance of downstream air operated equipment. It also reduces component failures, improves equipment performance and operator satisfaction while showing savings on both warranty and production costs.
These dryers are designed to provide the superior solution for existing compressed air systems, maintaining maximum process reliability while remaining virtually invisible to the process installation. They do not contain moving parts and there are no desiccants or refrigerant to replace. They are also compact and lightweight, do not incorporate valves, drains or electrical connectors and do not require adjustments.
These Hi-DRI membrane air dryers are suitable for a wide range of industrial plant installations including specialised commercial operations. The range of models available cover air flow rates from 17 to 1050 litres/min. Multiple dryer units can be used in parallel to achieve higher flows where required. Outlet dewpoints from +15° to -40°C can be achieved at 7 barg pressure (12.5 barg max) and with 35°C inlet air temperatures.
Circle no. 381 Circle no. 382
RETSCH Cutting Mills are used for
Powerful size reduction on a laboratory scale
Comfortable operation; quick and easy cleaning
sieves from 0.25 to 20 mm
Wide range of accessories incl. different hoppers, rotors, sieves, collection systems and cyclone-suction combination
www.retsch.com/sm Ideal for:
animal feed, bones, cardboard, drugs, electronic scrap, food, leather, lignite, non-ferrous metals, paper, plant materials, plastics, resins, rubber, sec- ondary fuels, spices, straw, textiles, organic and inorganic waste, wood, and many more
SIZE REDUCTION WITH CUTTING MILLS
)22556
LAB ASIA - NOVEMBER/DECEMBER 2011 - LABORATORY PRODUCTS
NEW
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
