VICES (BANGLE, CLAMP, ENGRAVER, MITRE, PIN & RING) Jewellers Engravers Vice, on Stand
Jewellers Engravers Vice, Hand Held for
Rings
Size and weight: • Overall length 150mm • Handle diameter Ø25mm • Top plate table Ø25mm • Top plate table opens up to Ø35mm
• Maximum size to hold objects 30mm x 30mm
• Wooden holding handle which can be unscrewed and secured in a vice
• Supplied with 8 pins • Weight 190g
Code R47021 Description
Jewellers Engravers Vice, Hand Held for Rings
UOM EACH Price £9.15
Joint Leveller, Made in UK
• Joint leveller for cutting metals such as gold/silver tube
• Traditional style tube and wire holding tool to give an accurate straight cut
• Made in UK How to use:
1. Place tube/wire in the triangle hole at the desired length to cut
2. Lock in the tube/wire by twisting the wooden handle 3. Using a saw piecing frame and blade rest the side of the frame against the flat part of
the tube cutter and saw the tube ensuring that the frame rests against the tube cutter to ensure the best results
Size and weight: • 95mm x 64mm x 70mm • Top plate, pin hole table 50mm • Jaws open to 20mm • Maximum size to hold objects 60mm x 40mm • Bottom of the stand has a rubber, none slip ring fitted and prevents the base from moving
• Weight 590g Code
V31291 Description
Jewellers Engravers Vice, on Stand
UOM EACH Price £11.65 MITRE, TUBE & JOINT Tube & Joint Cutters
Joint & Tube Cutters are an excellent hand tool to cut tube quickly and accurately. Cutting tube and wire freely can result in an uneven cut, incurring waste of time and materials.
Jewellers Engravers Vice, Hand Held
After cutting the tube/wire there is no filing involved, only the removal of the burr.
We stock this tool from a range of global manufacturers including Swiss, Italian, English and Indian manufacturers.
Do look at our complete range to ensure the most suitable product for you.
Joint Leveller
• Joint leveller for cutting metals such as gold/silver tube
• Traditional style tube and wire holding tool to give an accurate straight cut
• Made in India How to use:
1. Place tube/wire in the triangle hole at the desired length to cut
Size and weight: • 130mm x 64mm x 70mm • Top plate, pin hole table 50mm • Jaws open to 20mm • Maximum size to hold objects 60mm x 40mm • Wooden holding handle which can be unscrewed and secured in a vice
• Weight 190g Code
V1824 Description
Jewellers Engravers Vice, Hand Held
UOM EACH Price £9.15
2. Lock in the tube/wire by twisting the wooden handle 3. Using a saw piecing frame and blade rest the side of the frame against the flat part of the tube cutter and saw the
tube ensuring that the frame rests against the tube cutter to ensure the best results
4. Please note the tube/wire will be indented with a small point mark because of the way this tools locks the item to be sawn
Code J42156
Description Joint Leveller
UOM EACH
Price £10.95
4. Please note the tube/wire will be indented with a small point mark because of the way this tools locks the item to be sawn
Code J4256
Description Joint Leveller, Made in UK
Joint Leveller with Back Plate
• Joint leveller for cutting metals such as gold/silver tube
• Traditional style tube and wire holding tool to give an accurate straight cut
• Has back plate for extra stability and accuracy
• Made in India How to use:
1. Place tube/wire in the triangle hole at the desired length to cut
2. Lock in the tube/wire by twisting the wooden handle 3. Using a saw piecing frame and blade rest the side of the frame against the flat part of the tube cutter and saw the tube ensuring that the frame rests against the tube cutter to ensure the best results 4. Please note the tube/wire will be indented with a small point mark because of the way this tools locks the item to be sawn
Code J42157 Description Joint Leveller with Back Plate
Mitre / Jewellers Jig, 45 ° & 90 °
After using this tool it will be your favourite you will ever have purchased
• File/cut perfect 45 ° & 90 ° angles in sheet, wire & tubes
• For metal sheets, wire and tubes etc.
• Such a handy little tool that allows you to fairly easily create true angles on the edges or faces of work pieces.
• With a perfect angle you will get a strong solder joint, your piece will have the look of profession workmanship
• Notice on the side at the bottom of the jig two hex grub screws and two holes at the bottom of the jig. Slide a piece of metal rod with a “L” bend through this hole and lock. This technique can be used as a measuring jig in order to have your pieces the same consistent size (“L” bar/Hex key size not supplied)
• Made from hardened steel How to use:
1. The knurled knobs on the top screw up and down to loosen or tighten the jig.
www.COUSINS .COM 1063
UOM EACH
Price £12.95
UOM EACH
Price £33.75
VICES (BANGLE, CLAMP, ENGRAVER, MITRE, PIN & RING)
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102
